Jump to content

Marbar simul

Member
  • Posts

    3
  • Joined

  • Last visited

Marbar simul's Achievements

Newbie

Newbie (1/3)

  1. how many display computer do you use ?
  2. hi Martin ok, let's try to make it easy for you... i will tell you how i work with my systems, after long time of working with WO i can tell you that this is working properly: first, and i didn't read all this forum before and i don't know what will everyone here say i will preferred to work with WMV file, after trying all the format i found that WMV with high bit rate (7500 continues bit rate) is having the smallest CPU power used from all the other file format, the reason is that you don't need any codecs for playing it so the only part of the computer that work hard is the HDD and the graphic card. the format we use is: WMV, 7500 CBR (continues bit rate) single pass only. this will work great and you can use file up to 8-9 files with 1920 X 1200 resolution on one display computer and it will keep on running, i have the same configuration on my display computer as your computer's and i have no problem till now. working like this will let your CPU work faster on the process of the capture card and will reduce the delay of the system. and one more advice, for getting the sync right on a movie file, use the audio from the display computer! if you like your production computer running fluently during the show don't use the stage mode "best quality" with audio preview, use frame only! (try to see what happened to the CPU when you do it). and last advice, just rip the audio from your movie file to a WAV format and run it on a separated layer, then you can adjust the "in time" of the file and adjust it to sync perfectly with the movie (i have the same problem when i using the sharp XG - P610X projector that got a 30ms internal delay.) good luck !
  3. you are using the production computer for playing the audio ?
×
×
  • Create New...