Jump to content


Photo

Integrating live video into a presentation

Live Video

  • Please log in to reply
1 reply to this topic

#1 Robert

Robert

    Newbie

  • Member
  • Pip
  • 2 posts

Posted 18 June 2014 - 01:10 AM

Hi,
We are working on putting some live video into our show.
We received our new display computer with 3 DVI outputs for our three projectors
We had the system built for us with Black Magic capture card
When I went into the display computer to negotiate the SDI signal going into the black magic I had to un plug the 3 DVI outputs and plug just the monitor in the Center DVI output now the main projector is thinking that i have a hi definition monitor hooked on to it and projector has an improper size
Now i cant seem to make it return to the way it was....

I also had no luck adding live video there are so many variables which have to be bang on
My camera is SDI 865x480 or 16/9

Show is thursday .... Help!
rob

#2 Fredrik Svahnberg

Fredrik Svahnberg

  • Dataton Partner
  • PipPipPip
  • 140 posts

Posted 18 June 2014 - 07:20 AM

Hi Rob! Three DVI outputs and one SDI input should be piece of cake for WATCHOUT. Here is my best advice. Set all outputs to full HD (1920 x 1080), providing your projectors/screens accept full HD. Set your cam 1080i or 720p with the corresponding settings in WATCHOUT. If you still having problems you need to consult a WATCHOUT expert in your area. Where are you located?

 

Best regards,
Fredrik Svahnberg

Dataton







Also tagged with one or more of these keywords: Live Video