Jump to content

Check cluster establishment


tlsmikel

Recommended Posts

Hello, 

 

We have two wacthpoint at two PC. they work in cluster established using a "file-based control" as described at Appendix E of the user´s guide. After that we use a computer control for runing the show. 

 

It works fine mostly every day, but, as PC´s are switched on by wake-on lan, Sometimes cluster is not established and show goes wrong.

 

Is there any command or method, to obtain or know if cluster has being correctly established?

 

Thanks a lot,

Mikel 

Link to comment
Share on other sites

  • Moderator

Hello, 

 

We have two wacthpoint at two PC. they work in cluster established using a "file-based control" as described at Appendix E of the user´s guide. After that we use a computer control for runing the show. 

 

It works fine mostly every day, but, as PC´s are switched on by wake-on lan, Sometimes cluster is not established and show goes wrong.

 

Is there any command or method, to obtain or know if cluster has being correctly established?

 

Yes. But if you have a control system to ask that question, why not use that system to load the show?

The load command establishes the cluster, and at that time, the response will indicate any issues.

for example, here is the response when one output was missing at load ...

load "myshow"

Busy "Establishing Cluster" "" 0

Error 4 -2146950355 "Address not found: WO2; Display \"Indoor06\" of Stage Tier \"Indoor\" of Stage"

Busy "Cluster Established" "" 0

 

Otherwise, getStatus should provide what you seek.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...