heydearboss Posted February 24, 2017 Report Share Posted February 24, 2017 Hello there, I'm going to load-in a show tomorrow and have a question about audio. Since I've never done audio with Watchout before, I think it would be wise to ask the forum for some guidance before I run into trouble. There are a couple of .mov files that have audio embedded in them. The audios are expected to be played with the video in WO. We've rented a USB-DI(http://www.blackdogaudio.net/) and will be connected to sound system through XLR. Shall I connect the DI box to display computer or production computer? Are there any patches I need to do in Windows or WO? We are using Watchout 6. Any help is greatly appreciated. Thanks, C 0 Quote Link to comment Share on other sites More sharing options...
Dataton Partner RBeddig Posted February 27, 2017 Dataton Partner Report Share Posted February 27, 2017 Hi,To my knowledge, the blackdogaudio USB interfaces should actually work without installing drivers. I usually connect USB audio interfaces to my display computers but I know that other people use the production computer instead. Using the display computers in my opinion has a benefit when it comes to backup systems. Just plug one interface into the main display set and one into the backup set and both will work fine. /Rainer 0 Quote Link to comment Share on other sites More sharing options...
Alex Ramos Posted March 3, 2017 Report Share Posted March 3, 2017 From my experience if audio video sync is critical I use one of the displays to output audio. Otherwise production is fine. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.