Jump to content


Photo

Datapath VisionSC-SDI4 question

datapath capture question

  • Please log in to reply
2 replies to this topic

#1 NNinja

NNinja
  • Member
  • PipPipPip
  • 71 posts
  • LocationSofia, Bulgaria

Posted 04 May 2017 - 09:04 AM

Hi All!

 

Does anyone has experience with that capture card?

Is it possible to mix the types of input signals, i.e. 3x SD-SDI and 1x HD-SDI and use all of the simultaneously as inputs in WO ?



#2 RBeddig

RBeddig

  • Dataton Partner
  • PipPipPip
  • 87 posts
  • LocationBerlin - Germany

Posted 08 May 2017 - 11:29 AM

There is no limitation in WATCHOUT preventing this.

 

BUT, you need to make sure that the capture cards can be installed correctly and their driver(s) do not conflict. If this works with WDM drivers inside Windows it should also work with WATCHOUT.



#3 NNinja

NNinja
  • Member
  • PipPipPip
  • 71 posts
  • LocationSofia, Bulgaria

Posted 08 May 2017 - 05:36 PM

Hi

Tnx for the answer. I know there is no limitation in WO, it was more a question if I can mix signals in the same capture card based on someone's experience with this capture card, I saw some threads in the forum showing people are using it.

Meanwhile I've just received answer from a Datapath distributor, he says different standards in same capture card is not a problem... we'll see in a few weeks when we test on air :)







Also tagged with one or more of these keywords: datapath, capture, question