Jump to content

multiple displays per computer - no output on the rotated displays


Rogier Tuinte

Recommended Posts

  • Member

Since version 5 it's possible to have multiple displays per computer. We're using the radeon 6950 graphics card.

I'm a little bit disappointed that the resolution of each display should be the same, but OK.

In the release notes I read that each display can be placed freely on the Stage, and fully supports all the standard capabilities such as display density, rotation and edge blending to each output.

 

I connected 6 displays to our display machine (each running 1024 x 768), display 1 and 2 are not rotated, display 3 (-90 degrees), display 4 (90 degrees) and display 5 and 6 are not rotated as well.

When I put the alignment grid for example over all the displays. The alignment grid is only visible on display 1,2,5 and 6.

The rotated displays are black.... No output. When I remove the rotation, the alignment grid is visible on all the displays.

Link to comment
Share on other sites

Regarding rotation:

 

Yes, this is a known problem that will be solved in an upcoming release.

No timeframe on this yet, unfortunately.

 

 

Regarding "disappointed that the resolution of each display should be the same":

 

This is not a limitation of WATCHOUT 5, this is inherent in the graphic card setup.

Also related to keep the sync between the different outputs.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...