Jump to content

diskin

Member
  • Posts

    21
  • Joined

  • Last visited

Everything posted by diskin

  1. Hello, Can version 5 work with Windows 10? I've installed a new system for my client. I get an error (picture attached) when I go Online with Production software. All screens on the display system are black.
  2. Yes, it's worked well. As I wrote earlier, the same files work in an old project in the same PC
  3. Hello, It's worked without a wave file. I didn't try other audio formats. When I moved the audio away from the display, I don't have an error, but the sound doesn't work. Interestingly, the old project (without updating) with the same audio file worked well.
  4. Hello, I have a problem with one of my client's Watchout systems. The system works with the 5.5.2 version and Win 7 64-bit. Whenever I try to update the project with the audio file, the display app crashes with an error message on the produce software (please picture and log file from the display app attached). The old project with audio files in the display computer worked well. New Text Document (2).txt
  5. Thank you for the answer. I control the Watchout display with Crestron controller throw TCP/IP protocol.
  6. Hello, What is the correct way if one timeline works in a loop and I want to start another timeline and stop (with fade) the looping timeline? Thank You.
  7. Hello, Is it possible to fade out sound and start task timeline when another timeline playing in loop ?
  8. According to your explanation, this is the only solution to the problem. Can you recommend projectors you work with and what are the exact commands for dimming?
  9. Could the gamma calibration between the projectors improve the seam with mixed video content? How can I do an auto-calibration to projectors in watchout ?
  10. Hello, How can I improve an edge blending in mixed video content? I have 6 DLP projectors, 3 projecting on the wall and another 3 projecting on the floor. On the wall displayed content filmed on the beach (in daylight), and after a certain time, displayed a shot filmed in the evening. The transition between the contents causes the edge blend to show bad between projectors. If I adjust the edge blend to the brightness content, you can actually see the seam in the dark content and the opposite. What is the solution to such a situation? Is it possible to create a dynamic edge blend that will depend on time or content? Best regards,
  11. What is recommended video codec for 4k and above resolution ?
  12. Hello, I created video file ( mp4 H265 codec) with 4K resolution. When I trying to run this file from the timeline (watchout production ver 6.6.1), the file did not run at all. When I try to transfer this file to player, same thing happen. What could be the problem ? (the file playing well in windows) Thank you
  13. Thank you. Your suggestions helped. I changed the setting in both pleases to full range and it's look good.
  14. Thank you for the answer. But the p4000 should have DisplayPort and should not be affected by this setting? The card have 4 DP. I'm connect only 2 outputs. It's windows 7 with latest Quadro drivers. Have you checked the settings for the colour range. I remember NVidea cards used to go from 16-255 instead of 0-255. You can change this in the graphic card settings. I changed the setting in NVidia control power (picture attached) ,and it doesn't help.
  15. Hello, I have problem with Quadro p4000 card. Watchout version is 5.5.2 There are differences in the colors between png files and video files. Same project works well with AMD graphic card You can see it under this link: https://www.dropbox.com/sh/c1iujxucp27e155/AAD96ulTNZ93Retd2qUNX6-aa?dl=0 Thank you
  16. Hello, How can i download this version without register again and again. Anyway I don't get the emails with the link. Thank's
  17. Hello, Where i can find version 5.3.1 for download ? Thank's
×
×
  • Create New...