Using a Crestron system, I am trying to talk to a Watchout System over IP. More specific I am trying to get the status of individual timelines, (Paused, Stopped, etc…)..
I received this from a support tech with Dataton.
I also have a document with what a response should look like.
Example 1:
Your WATCHOUT show is named "TestShow" and the auxiliary timeline inside the show is named "Movie1" and you want to know the status continuously.
To achieve this you send the following strings (in bold to WATCHOUT display computer by TCP/IP or UDP/IP to port 3039.
Note, every line should be ended with a carriage return character (0x0D):
authenticate 1
load "TestShow"
(you now need to wait some time for the cluster to build up 1-5 sec)
getStatus 1 "TaskList:mItemList:mItems:TimelineTask \"Movie1\""
(Now you will get a periodic update of the status of the Movie1 timeline.)
(To reset the status you simply send the same string but with the "turn-off" parameter)
getStatus 0 "TaskList:mItemList:mItems:TimelineTask \"Movie1\""
Example 2:
Your WATCHOUT show is named "TestShow" but you have already sent one load command so the show is already loaded.
The auxiliary timeline inside the show is named "My Super Show" and you want to know a "one-shot" of the status.
To achieve this you send the following strings to WATCHOUT display computer.
Note, every line should be ended with a carriage return character (0x0D):
getStatus 2 "TaskList:mItemList:mItems:TimelineTask \"My Super Show\""
I have tried this to no avail.
Additional Notes
This is what I am getting back
Error 6 6 "Command: getStatus; Invalid/unexpected/damaged data: getStatus 1 \"TaskList:mItemList:mItems:TimelineTask \\x22Timeline1\\x22\""\x0D\x0A
I copied it directly from the email. But replaced my timeline name.
getStatus 1 "TaskList:mItemList:mItems:TimelineTask \"Timeline1\""\x0D
A Ping command gives me this
Ready "5.5.1" "WATCHPOINT" "Windows" true\x0D\x0A
Any thoughts?
I copied it directly from the email. But replaced my timeline name.
getStatus 1 "TaskList:mItemList:mItems:TimelineTask \"Movie1\""\x0D
A Ping command gives me this
Ready "5.5.1" "WATCHPOINT" "Windows" true\x0D\x0A
Any thoughts?
What a response should look like.
Example 3:
Note the quoted auxliary timeline name, which must use escaped double-quotes since it’s
embedded in the property path string.
getStatus 1 "TaskList:mItemList:mItems:TimelineTask \"Timeline 1"\"
:
Status ”TaskList:mItemList:mItems:TimelineTask \"Timeline 1\"” 2 12114 94553321
:
Status ”TaskList:mItemList:mItems:TimelineTask \"Timeline 1\"” 2 17210 94558417
