Jump to content

Essam Ahmed

Member
  • Posts

    6
  • Joined

  • Last visited

Everything posted by Essam Ahmed

  1. i know but i can't upload the show or go online for the display server, i can make remote access and Test connection is Ok, is there amethod to make factory reset for the Display server WatchPax4, i think this may solve the problem. m.
  2. thanks @JFK but this server was working normally before using ip and the same network configuration, but suddenly this happened and this message when i tried to change the media, so i may try with unmanaged switch.
  3. i have one display server watchpax4 and one production laptop with watchout liciense and connected togther within the same subnet, the production pc see the display and the conection is"Ok" asper atcched image. but when make online the message " From Display "Display_1" of Stage Tier "Base" of StageList of Stage, 2022-06-28 9:27:31 PM Runtime error; Command: activate; Display Address or Output not found", and " From Display "Display_1" of Stage Tier "Base" of StageList of Stage, 2022-06-28 9:27:31 PM Runtime error; Command: gotoTime; No show active" appear if any face the same problem can advise. thanks...
  4. I have watchmax media-servers with Wx9100 graphic it was working normally but one time during powering up the server it did not boot and it hold for attached picture and not enter the watch out interface also the LCD integrated. On the main board of the server show this number as shown in se ond Pic. Please any help urgently thanks..
  5. we have little issue with the display servers WATCHPAX which have four display output and the other which have 6 mini-display outputs the issue that: Before that When powering the display server from the rack switch the server start up directly without pressing the front start Bush button, and also we were able to Power down and power up the server from Watchout show through remote control submenu, but now the server doesn’t startup directly when powered till press the start Bush button and We can’t power up the server from watch out show but only can power down. Please advise.
×
×
  • Create New...