Jump to content

artboy

Member
 View Profile  See their activity

  • Posts

    49

  • Joined

  • Last visited

 Content Type 

Everything posted by artboy

  1. artboy
    Thank you for your response. WO6's mask function could be generated and processed directly inside WO. Can I just think that it hasn't been implemented in WO7 yet? All programs, including webview2, are using the latest version.
  2. artboy
    We tested 7.1.2. The stage MASK function is not working When I create a show through a producer, there are times when the program ends without any warning.
  3. artboy
    green effect is disappear when use width pixel size over 1920px. width 1922 px is fine. Solution is update WO.
  4. artboy
    Try Mosic function in nvidia control panel, if you don't need WATCHOUT geometry funcion (e.g LED screen)
  5. artboy
    @Eric Sambell I have the same problem. Did you solve it?
  6. artboy
    COMPANION IS Awesome and good tool for control WO
  7. artboy
    @Jacquie McHale The registration of newsletters related to wo7 was carried out before. I haven't received any mail yet. When can I get it?
  8. artboy
    if you possible, could you attache some pictures that explain you situation?
  9. artboy
    I think you use a total of three channels. MCTRL4K What displays are connected to other 2 channels except connected channels?
  10. artboy
    september 1, 2023 Next week~!!!!
  11. artboy
    Because of these problems, I use NVIDIA. It's very pleasant.
  12. artboy
    It doesn't matter if it's one or two files. The key point is the projector. Case A. If the projector receives a two-channel input to implement 3D, WO can output two channels. Left and right.. Case B. If the projector receives only one channel input to implement 3D WO creates a frame with left-right content and exports only one channel. The problem is the geometry transformation. In the case of A, you can apply the geometry correction value for each channel and export it. In B, geometry correction within the WO is not available because the content placement within the WO is different from the actual projected area. In this case, the projector should only be projected with its own calibration.
  13. artboy
    I think the black frame is seen in a short moment when the media file is uploaded to the buffer. Turn off the automatic pre-roll setting in the second content setting and manually enter the time to test. The two contents must be located on different layers.
  14. artboy
    For resolution, the setting is through Production, but it is the Display server that generates and exports the actual signal. It's hard to understand why Watchmaker is shut down because of that. I've used a mix of WUXGA and FHD in the field, and I've never experienced this symptom. I'm testing it in a lab, but it hasn't reproduced the symptoms yet. Can you provide more information? Is it only when you connect six channels? Or is it the same with fewer channels on the same GPU?
  15. artboy
    Does it mean that you can see BMD live on WO display computer, but you can't see BMD live on WO production? Does WO production have a BMD capture card and the same signal is being input? In order to use LIVE media, capture cards must be installed on all servers regardless of role.
  16. artboy
    The first thing to check is whether the signal is confirmed in the BMD's own program (Media express??). If you see a signal there, set the exact properties of the signal in WO. (Resolution, Refresh Rate, etc.) One more questionable thing is that the source of the signal is the Blu-ray player. In this case, HDCP encryption is performed, but the capture card is a device that does not support it. If HDCP is hung, the screen will not appear in BMD's own program. Check using a camera or other signal source To turn off HDCP, you may need to add equipment such as splitters and matrix switcher.
  17. artboy
    I have a lot of experience that show files do not work properly during version migration. The content that was normally played does not work after the update (of course, it works normally when you create and import a new show) There is also an experience that the queue made does not work. In particular, 5>6 had more frequent problems I don't migrate as much as I can If necessary, the version upgrade is performed by recreating the show by hand
  18. artboy
    Check This link https://vimeo.com/channels/watchout It's a systematic training video for watchout.
  19. artboy
    In my case, I have about two minutes to spare. (Use cmd to execute the ping command.) Priority is set, and watchpoint has no problem selecting the desired NIC.
  20. artboy
    Hi Jfk. I've been waiting for version 7 for a very long time. Do you know why the development is delayed? DATATON seems reluctant to talk about this. I like WATCHOUT but now I think I should consider another media server.
  21. artboy
    I use 2 NICs without any problem. Does watchpoint run before NIC driver is loaded? Did you confirm that the priority is maintained after reboot? Is the symptom the same even if you run watchpoint after that?
  22. artboy
    Thank you jfk. It's very helpful.
  23. artboy
    The confirmation is late. Thank you for your detailed reply. Is the meaning of 'automatic recovery of a watchpoint' correct to follow the show again when watchpoint is forced to shut down due to an error and watchpoint is re-run by watchdog?
  24. artboy
    I'm writing because I'm curious.Why is Production Mode not recommended when controlling with external control protocols via public network?
  25. artboy
    What WO verision do you use ? What kind of image source do you use? Does it affect randomly or consistently?
×
×
  • Create New...