Jump to content
Dataton Forum

Fredrik Svahnberg

  • Content Count

  • Joined

  • Last visited

About Fredrik Svahnberg

  • Rank

Profile Information

  • Gender
    Not Telling

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Yes, any iOS or Android mobile device can be addad as a "Display Spot" in Blocks. Page 5 in the manual: Spots Locations of interest, such as displays, theaters, geographic locations or positions inside a building, are commonly referred to as spots. The spots are listed on the left hand side on the Display page, (see above) and can be arranged into groups and sub-groups as desired to simplify navigation and programming. Spots also include mobile devices, which may be a permanent part of the system (such as an iPad used as an operato
  2. You do not have to look for custom development. There is a standard solution on the market which does exactly what you want to do: Controlling (and synchronising) playback between mobile devices and WATCHOUT. It is called PIXILAB BlocksĀ®. For more information, please study the short manual: https://pixilab.se/outgoing/blocks/PIXILAB-Blocks.pdf PS Search for "WATCHOUT" in the pdf document
  3. Very sad. Mark was such positive and genuine spirit. RIP.
  4. Hi Ruben! If you want a rock solid solution for controlling WATCHPAX, DMX etc from touchscreens or mobile devices, I would be delighted tell you more about our PIXILAB Blocks system http://pixilab.se/blocks. Please contact me off forum so we can continues the discussion. Speak soon, fredrik@pixilab.se
  5. StaffVerneir, don't waste your valuable time. Use a turn-key control system that works PIXILAB Blocks can control WATCHOUT in ways similar to WATCHNET, including built-in support for "Sleep" and "Wake-On-LAN".
  6. Hi Shane! This sounds like the Chrome issue that effect certain touch-screens (interfaces) - but not all. The last version I know works for all is v60.0.3112.114. (Sep 2017)
  7. Hi! We (PIXILAB) might have a solution for you. Can you shed som light on how the authentication works. Is it done with credentials (name and password) or with a certificate? Fredrik S at pixilab.se
  8. I know this is an old thread, but I know forum members are constantly searching the forum for advise and solutions and sometimes the hit is an "oldie". So, regarding this topic, we had exactly the same problem, using exactly the same interface - the ELC Buddy. And it was indeed the ELC buddy which caused the issues described above. Swapping interface to a standard ENTTEC ODE solved the problem.
  9. Hi Giri! Yes, the Epiphan AV.io family is plug and play with WATCHPAX, providing you have the latest firmware installed in your WATCHPAX (this is important - please check with Dataton regarding WATCHPAX firmware versions for USB Capture drivers). I have even used dual interfaces, on a single WATCHPAX4, on several projects. All the best and good luck with your projects. PS I think there was a small problem in one of the firmware-versions where you had to make a re-load (Stage menu/Manage Display Computer/Remote Access) of WATCHOUT in the WATCHPAX after boot up. Otherwise, it could
  10. Hi Michel! You can copy your complete show into a "composition" and apply a brightness/contrast tween track to this composition.
  11. Hej Mathias! Can it be the space (mellanslag) in your show name.
  12. Hi Tim! I agree. Dataton should update the available choices in the Live Video dialog box But don't worry about the input list. Just choose "RGB" or whatever. And "Other" as Video Standard and enter and the desired resolution manually. Jim's response above re. the Vision SC-DP2 is as accurate as always. Nice card.
  13. Hi Christian! Sorry, there is no way to delete Stage Tiers. You can Rename them but not Delete them. Dataton is aware of this common "feature-request" Btw, are you coming to MonitorEXPO in Copenhagen next week (Nov 2-3)? We will be showing off with Projection mapping, LED displays and the brand new WATCHPAX4
  14. Nice job, Benoit. And good use of the "interaction name" feature. Thanks for sharing.
  • Create New...