Jump to content
Dataton Forum

Eddy Yanto

  • Content Count

  • Joined

  • Last visited

About Eddy Yanto

  • Rank

Contact Methods

  • Website URL

Profile Information

  • Gender
  • Location
  1. I remember seeing a sample WatchOut 3D stereoscopic project with media files a few years back when the feature first came out but I can't seem to locate it anywhere on the site now. Does anyone has it? May I know where do I get that sample project with the media files again? Thank you!
  2. Hi Andrew, Thank you for sharing your dual UHD setup! I will look into using the same setup.
  3. Hi, I am looking to build a system with the following requirements: The system will have 2 outputs to 4K projectors — I don't have much detail on this yet except that the projector will be able to accept the 4K signal on a single DP 1.2 port. The system will also take in 4 HD-SDI inputs. In the past, I had built and configured a few systems based on the spec and tweaking list released by Dataton (both May 2012 and Mar 2013 Edition) and have not seen any newer update on the spec yet. Does the same spec still applicable to use? Would you be able to share or recommend the hardware that fit
  4. Hi Mike, So, I've been trying for a while to make the image tweening effect to animate consistently on both Production and Display using my half baked method. I tried to make it smoother by increasing the display framerate from 60 to 100 fps and also reorder the tweening (first by calling corners tween then scaling and x position), but obviously they didn't work. Earlier today, I tried the approach you suggested and set the vanishing point to the center. The vanishing point makes more sense to me now and it could potentially solve the inconcistent animation I was having by using m
  5. Hi Mike, Thanks for the explanation on the global and local vanishing points. I am not using Rotation tweening for this time, I did it another way which I deem easier - tweening a combination of properties of the image: Position X, Scale X and Corners. I've got exactly what I wanted using this combination of tweenings, here's a demo of tweening which is controlled using external program : https://s3.amazonaws.com/e-static/coverflow20120912/coverflow.html I found another problem though, when I tried the tweening in Production machine and also in Display machine controlled from
  6. Hi jme, where do I set "Right Edge" for the Anchor Position? Under "Media Cue" dialog box, I found only "Top Left" and "Center". Hi lichtler, yes, it's sort of rotating cube. I've tried to make the images to look like rotating cube but it seemed rotation tweening isn't the right method to do it. I just tried corner tweens which is only available in WatchOut 5.2. I am half way through it now and it seems I am able to make it closer to what I am trying to achieve compared to rotation tweening. Will post result later, thanks!
  7. Here's what I've got so far: https://s3.amazonaws.com/e-static/tween.html Also, links to my watchout file and utility (done in Processing) that is used to control the tweening : https://github.com/eddyyanto/watchout-tweening Help and advice is appreciated! Thanks!
  8. Mike, thanks for pointing me to the transition rate parameter. Now, using the third parameter, the animation tweens nicely from one value to another within the specified transition rate. Here's the related bit from the manual (page 246): Btw, I've been playing around with all the tweening methods: I would like to be able to tween the image from A to B using one or more tweening variables but I just can't get it to look like it yet. Using the Rotation Y tweening, I got the image C which looks like <link : http://en.wikipedia.org/wiki/Parallelogram> parallelogram ins
  9. I have a number of images on stage with "More Effects and Capabilities" selected. I've also defined a few "Generic Input" to be used for tweening the properties of the images, such as (the variable names speak for themselves but I'll just add a short description of each): RotationY : for Rotation Y tween property ScaleX, ScaleY : for adjusting the X and Y of Scale property X, Y, Z : for adjusting the X, Y and Z position of the image Here's a screenshot of my stage: What I am trying to achieve is to be able to make the images flick to the left or right using external TCP control, us
  10. Found the discrepancy in WatchOut 5 user guide, it works if I add "true" between the named control cue and auxiliary timeline. gotoControlCue two true L_XF
  11. Hi, I have a few named control cues in auxiliary timelines and would like trigger and run them based on their names. One of my auxiliary timelines is named [strong]L_XF[/strong] with the following named control cues inside that auxiliary timelines: - one - two - three etc I would like to be able to trigger them through TCP command but it keeps failing me. gotoControlCue two L_XF where two is a named control cue inside an auxiliary timeline named L_XF. From the above command, I got the following error message: Error 6 0 "Expected true/false: L_XF" I refer the above comma
  12. Dan, I was more looking into retrieving the running auxiliary timelines through TCP/IP control to which jfk replied there is no way we can do that (yet). There is nothing in the IP [strong]control[/strong] commands to do this. You may be able to accomplish your goals with output devices and output commands on the aux timelines to communicate this to your iPad apps. Makes sense. Thanks, jfk!
  13. I have a WatchOut setup that includes 1 production and 3 display machines which are defined as left, center and right. I am going to have 2 iPads that trigger auxiliary timelines that would play on left and right display. Is there a way to know which auxiliary timelines are currently playing? E
  • Create New...