Jump to content
Dataton Forum

Quim

Member
  • Content Count

    63
  • Joined

  • Last visited

About Quim

  • Rank

Contact Methods

  • Website URL
    http://www.yurtas.net
  • Skype
    quim.martinoy

Profile Information

  • Gender
    Not Telling

Recent Profile Visitors

771 profile views
  1. Hi, I was using a motherboard with 2 NIC Regarding files, I was using single files for each channel and then you can assign to the output you want. Quim
  2. Hi, I just set a system with DVS with 30 channels splitted in 2 WO servers. It's working fine using 2 NIC, one for the WO and the other for the DVS. When you setup your NIC properties, if you go to Advanced Options, for the WO NIC you should disable Automatic Metric and set it to 1. For the NIC used by the DVS you can leave it to Automatic. WO will take the Metric 1 as NIC and you can set the DVS to use the other one. Hope helps. Quim
  3. Hi all, We have a system with the Dante VSC working great for output but I wonder if there's any way to use to send TC to WO to sync. Best regards, Quim
  4. Hi, I've been involved in a very big project where I had to add many correction points and it's quite hard when I have to select, modify, so would good to have for the next version a zoom option in the geometry tap of the Display window. Same in the View and Calibrate taps for 3D projectors. Best regards, Quim
  5. Hi Reiner, We are all fine, thank you for asking. I will tray again. Best regards, Quim
  6. Hello, I have a simple question. Are Watchpax2 compatible with NDI inputs? We have a installation with WO servers, WP 20 and WP2 and I have made work with WP20 but not whit WP2. Thank you Quim
  7. Hi Orf, For powerdown the Display computers you have the powerDown command. Regarding powerup the only option you have, as far I know, is to use a wakeonlan command. Best regards, Quim
  8. Hi, yes need at least the WATCHOUT dongle connected to your computer. Don't remember if offline works. Best regards, Quim
  9. Hi Jim, if you have a WO 6 only dongle, is it possible to add WO 5 licensing online to use with WN? Regards, Quim
  10. Nikolai, Another option you have is to create an empty show, for example "clear shows" with the same displays you want to clean and use the funtion Stage/Manage Display/Delete Other Shows.... Very useful to clean many computers at same time. Quim
  11. Newbie question I made, I have my own reply, useful when you have a project done for 4K projectors and want to use with HD projectors. Best regards, Quim
  12. Hello, I just done a quick test with HW Hercules Setup utility and I could move it without any problem. I would suggest you to test it and then check what could be wrong in your application. I used WO 6.5. Best regards, Quim
  13. Hi all, Could someone explain any example where would be useful to use different Stage Resolution for 3D mapping projectors? Best regards,
  14. Thank you for your reply. Quim
×
×
  • Create New...