Jump to content

Quim

Member
 View Profile  See their activity

  • Posts

    97

  • Joined

  • Last visited

 Content Type 

Everything posted by Quim

  1. Quim
    Hi, Today I tried to test export and import assets and it doesn't work. When I copy the address where I have the exported assets, the assets appear for a second in the Assets windows and then go and receive and "Asset Manager action failed (Import)" when I it was with no assets at all. After adding an asset doing drag and drop of the original media then can import assts correctly. When changing working directory you have to manually create a .wo folder if not you have errors when loading media as WO7.1.2 doesn't create the .wo folder. If I'm not wrong previous versions did it. Quim
  2. Quim
    Hi, I've seen this new feature in WO7.1.2. Please, can you explain a bit how does it works? Or it's only for Watchpaxes with WO6 and WO7? Quim
  3. Quim
    I like very much how WO7 is managing the audio, you have busses and decide to what audio devices want you to send and then route any channel of any audio file to any bus. Regarding videos with audio embedded WO7 automatically crates a separate file of video and audio and a composition with both files so you can route the audio to the bus you want. Quim
  4. Quim
    PJlink control of the Panasonic projectors is like a little pain, often are not responding to the commands, with WO, AMX or simple PYTHON programs that work fine with other projectors or devices, I often send the commands twice to get a response. Sometimes I use "Chataigne" for simple control and web interface and you can see how the Panasonic projectors are automatically close the connection then Chataigne in reconnecting again. Quim
  5. Quim
    Hi Jason, I used double NIC many times with Windows priority, specially when using DANTE VIRTUAL SOUND CARD, with no problems and I always use de -Delay command to be sure all drivers and specially network are correctly set, I normally use 10 seconds but you always need to check if you need more to be sure all is ready. But anyway, you are right, you should be able to select which NIC to use in Watchout, hope they include it in the next version. Best regards, Quim
  6. Quim
    Thank you Jim. Best regards, Quim
  7. Quim
    Hi, I'm in aproject with a client that has a Watchpax 60 C and I wonder how to setup the SDI as outputs. I couldn't find any reference on the PDF user manual how to set up the SDI as inputs or outputs. I'm missing anything? Thank youç Quim
  8. Quim
    You can use DMX for this because same channel number and universe for out and in, nothing to do with names. Regarding generic outputs and inputs are not related, and would be great if could use generic outputs as variables so that kind of actions would be easier to sort.
  9. Quim
    I agree with you!!
  10. Quim
    Thank you for sharing.
  11. Quim
    Thank you Rainer, I forgot to talk about the Companion
  12. Quim
    Hi, One thing you can do is to create as many Control Cues with different names you need and then same number of auxiliary timelines to jump to the related control cue and then trigger this auxiliary timelines from the streamdeck
  13. Quim
    Hi, I was using a motherboard with 2 NIC Regarding files, I was using single files for each channel and then you can assign to the output you want. Quim
  14. Quim
    Hi, I just set a system with DVS with 30 channels splitted in 2 WO servers. It's working fine using 2 NIC, one for the WO and the other for the DVS. When you setup your NIC properties, if you go to Advanced Options, for the WO NIC you should disable Automatic Metric and set it to 1. For the NIC used by the DVS you can leave it to Automatic. WO will take the Metric 1 as NIC and you can set the DVS to use the other one. Hope helps. Quim
  15. Quim
    Hi all, We have a system with the Dante VSC working great for output but I wonder if there's any way to use to send TC to WO to sync. Best regards, Quim
  16. Quim
    Hi, I've been involved in a very big project where I had to add many correction points and it's quite hard when I have to select, modify, so would good to have for the next version a zoom option in the geometry tap of the Display window. Same in the View and Calibrate taps for 3D projectors. Best regards, Quim
  17. Quim
    Hi Reiner, We are all fine, thank you for asking. I will tray again. Best regards, Quim
  18. Quim
    I'm using WO v 6.6
  19. Quim
    Hello, I have a simple question. Are Watchpax2 compatible with NDI inputs? We have a installation with WO servers, WP 20 and WP2 and I have made work with WP20 but not whit WP2. Thank you Quim
  20. Quim
    Hi Orf, For powerdown the Display computers you have the powerDown command. Regarding powerup the only option you have, as far I know, is to use a wakeonlan command. Best regards, Quim
  21. Quim
    Hi, yes need at least the WATCHOUT dongle connected to your computer. Don't remember if offline works. Best regards, Quim
  22. Quim
    Hi Jim, if you have a WO 6 only dongle, is it possible to add WO 5 licensing online to use with WN? Regards, Quim
  23. Quim
    Nikolai, Another option you have is to create an empty show, for example "clear shows" with the same displays you want to clean and use the funtion Stage/Manage Display/Delete Other Shows.... Very useful to clean many computers at same time. Quim
  24. Quim
    Newbie question I made, I have my own reply, useful when you have a project done for 4K projectors and want to use with HD projectors. Best regards, Quim
  25. Quim
    Hello, I just done a quick test with HW Hercules Setup utility and I could move it without any problem. I would suggest you to test it and then check what could be wrong in your application. I used WO 6.5. Best regards, Quim
×
×
  • Create New...