-
Posts
22 -
Joined
-
Last visited
Posts posted by Leonard
-
-
On 1/28/2020 at 4:48 PM, Michael said:
I had some similar strange behaviour while upgrading from 6.2/3 (don't remember exactly) to 6.4.1/6.5.
Try writing again ALL your parameters within the control cue, and test it to see if this causing the problem.
sounds interesting as I have encountered similar issue recently while sending "gotoControlCue video0" to WP20 version6.5, but somehow it wouldn't happen again after few reboot. I thought it was a coincidence at that time and didn't look into it too much. Good to know.
0 -
Same problem here. four 4k are connecting to WATCHMAX 2.0. transfer speed is worse with 6.4.1
0 -
I have encountered similar case before, unable to perfect sync two display machine by using AMD framelock time server.
like what Benoit said. I tried using external house sync generator to fix it. My case is applying Rosendahl Nanosyncs HD for sending HD1920x1080, 60Hz.
see if it helps.Leonard
0 -
It has been a while since 2015 we provided these mechinces, I expect that it's time to dust off the machine and have a check if all of fans inside the chassis work properly.
Good airflow & air conditioning will definitely help on this.
please feel free to contact me at leonard@avt.hk for further discuss.
0 -
Hi,
I have a project where we are going to use a Watchpax 2 for a 2 projectors blending screen. Our idea was to do a only one 3552x1080 px video in HAP. Do you know if it will work or we should pre-split it?
Thank you.
Hi Quin, I have similar setup with WATCHPAX 2 recently to run a 3840 x1200px HAP video (around 2mins, 9GB) , and I tried 4 chunks and no chunks, both are running smooth with WATHCPAX 2.
0 -
-
Hi there,
I'm a catalyst operator and I want to jump in watchout 6 in order to understand how I can replace catalyst in same cases.
My question are focused on the hardware side, I have a media server with an AMD R9 290 with 2 DVI, 1DP and 1 HDMI out.
For the next work were I would like to use watchout I have a big ledwall that work with 2 DVI ledwall controllers. With catalyst I'm used to split the big resolution of the ledwall with a datapath x4, with this solution I get a perfect sync between the 2 output of the x4.
Can I do the same thing with watchout?
What will happen if I connect the ledwall controller directly to the VGA DVI output (with EDID emulator)? Will I get perfect sync?
Wath about sync if I use the DP with an MST Hub?
Cheers Simone.
You may need a Firepro grade graphic card with S400 sync module (or same grade of Nvidia) with framelock features in this case in order to get a perfect sync.
Recently I have a show in order to feed 6 x HD signal for the main LED wall, and it works great wtih Firepro W9100 and S400. hope this help
Leonard
AVTHK
0 -
You may lock up all of outputs of W7100 by managing EDID function under Fire pro Catalyst. The signal should not be jump or re-order afterward.
S400 is very sensitive on the outputs EDID, please make sure the forth on is same with the others or simulate all EDID by the first output and clone it. Otherwise, they could not be synced.
Leonard
0 -
Thank you for sharing ATMOSPHERE. It looks great!
btw, there is a new product coming up called WATCHNET which is powerful for custom control of WATCHOUT from different platform. (e.g. iPhone, iPad, Android tablets/phones and Windows Surface or Mac/Windows laptop) You may interest in it.
0 -
Good Day!
Hi, I am wondering how to use MACBOOK(PVP) connecting with my WO DVI capture card for live video source?
How to set up and add it into the output screen. please advice.
Is needed any software setting?
ps: Watchout 4.1 with DVI capture card.
thanks x1000
Hi WOchan,
What card model are you using now? Please feel free to contact me at leonard@avt.hk
0 -
Hi
When I switch to Datapath inputs, the captured feed freezes in a few seconds. I have to Offline/Online back and forth to go on. Tried with 3 different computers. Decklink input is just fine though.
Drivers and Watchout are all latest version.
Regards
Efe Ersoy
Hi Efe, What kind of Datapath capture card do you use?
0 -
Thank you Adela, a good stuff.
btw, now the problem between WATCHOUT & V3 KISSBOX DMX was solved.
Firmware V5.1 update is needed. It can be found on kissbox.nl
0 -
Thanks for the feedback, Peter & Leonard!
Please noted that only the DMX1TR - DMX-512 Transceiver Version 3 is not work with WATCHOUT at this moment.
For the others V3 I/O control Like IO3CC or IO8CC..etc, they works well like version 2. by my test.
0 -
Hi Joel,
run msconfig, go startup tab,
make sure all of the startup items was uncheck except WATCHOUT. Hope this help.
0 -
Same experience here. The V3 KISSBOX doesn't work here.
0 -
same result with our machines. WATCHOUT 5.3.1. Well tweaked.
Spec:
Im wondering what kind of software you use to produce this kind of files. (even QT, Procoder, etc cannot read the info of the video files.)
I have try another way to produce a 2330 x 1050 H264 file.
produce a animation mov 50 fps by AE, convert it by adobe media encoder to H264 (.mp4)
(why I use adobe media encoder because the size was limited at 2000 x 1xxx px in Procoder. this limitation may come from H264 Level issue).
Then I got the same result with your .m4v file. It freezes at the first frame.
To me, I prefer to use pre-spilt mpeg files for the playback.
0 -
http://forum.dataton.com/topic/815-remote-controlling-with-watchout-problems/?p=2947
The Thread above has a great section on PJLink. Your projector has it, and it's loads easier than serial.
Yes. you are right. And it works perfect via TCP/IP.
I just want to give a test with KISSBOX RS4tr to see if it can convert TCP/IP command to RS232 generally. I may it in to control some lighting stuff in the future project. Anyway, thank you for your reply.
0 -
Hello All,
We have a Kissbox RS4tr 4port serial over ip box in a show. We are having a little trouble getting commands to the Barco SLM r12+ for dowser control.
We are sending an output to it's IP address on port 9812, but I'm curious if you need to tell it anything else about which of the 4 ports to go to.
We only need the 1 port to work,
Could be that we have the HEX wrong, but that's a completely different story.
Thanks,
Clint
Hi Clint,
I have encountered this problem with RS4TR in order to send out a rs232 command to panasonic projector ew6300.
have you got the solutions finally?
0 -
Create a composition may help.
0 -
I have a request from my client that they would like to control watchout playback by AMX control.
any information or material that i have to provide them for their programming use?
0 -
When I power on the Display server, WATCHOUT Display will auto run at the startup and go FULLSCREEN.
It will go back to "window mode" like Control + W clicked automatically after few seconds. It's only happened in multi ouput case.
Any good solutions to solve it?
0
HAPQ files look great in VLC and QuickTime but look horrible in WatchOUT.
in WATCHOUT FORUM
Posted
Try using FFmpeg to encode HAP, HAPQ, HAP ALPHA, it always work perfectly with WATCHOUT.
https://knowledge.dataton.com/knowledge/what-tools-can-i-use-to-encode-decode-and-transcode