tirymarq

I have: 1 WO with 4 outputs with 1024x768. This is not working. 1 WO with 4 outputs with 1024x768. This is working. 1 WO with 4 outputs with different resolution outputs (up to 1920x1080). This is working. 1 WO with 3 outputs with different resolution outputs (up to 1920x1080). This is working. All WO are connected to the same switch, closed network, with fixed IP address. All outputs connected with FO extenders Gefen DVI 1500HD. All contents .mov, but different resolutions, never more than 1920x1080. All WO are the same computer model

It is 1 WO with 4 outputs. Connected with DVI through fiber optic extenders Gefen. Also I have 3 more WO with 4, 4 and 3 outputs connected, but it only happends in this I have told you about. All are syncronized. No hardware EDID Managers used. Thanks

I am using 4 WO 5.2 computers to make a cube. One of sides is 4 projectors with syncro video making a 2x2 screen. It has happened 3 times that during the show suddenly it appears the WO logo in the 1st screen, about 10 seconds later it appears in the 4 screens and about 20 seconds later goes back to the show syncronized and working ok. Normally show is running 13-15 hours a day properly. Any idea? Thanks!