Search the Community
Showing results for tags 'DVI'.
Found 4 results
Hi all, just to clear things up: WATCHPAX needs an ACTIVE MiniDP to DVI/VGA/HDMI-adapter, passive will not work. HDMI output can be achieved through adding a passive DVI->HDMI converter to an ACTIVE MiniDP to DVI adapter. /jonas
Hi all, I'm setting up a watchout system for a theatre tour. Components: Windows 7 64bit 16 gb ram I7 3770k Asus sabertooth z77 2x intel 520 ssd 120gb Hd7970 dc2t3gd5 Datapath rgb e1 Decklink SDI 2x. Panasonic dz770 Poduction: 1x hdsdi capture 720p50 1x macbook pro capture 1 main background graphic will be used and max 2 duplicate hdsdi captures 2 questions left 1- will my specs be capable of running a smooth wathout show 2- I'm looking for the best solution to connect 2 panasonic dz770 projectors on to my watchout display computer. It will be used for a theatre tour. So no much interference with main power cables etc. My three ideas: - DVI ->. Rgbhv running 50m cable and connected on the rgbhv from the projector - DVI fiber 50m http://www.kramerelectronics.com/products/model.asp?pid=783&utm_expid=56716085-7&utm_referrer=http%3A%2F%2Fwww.kramerelectronics.com%2Fproducts%2Fsearch.asp%3Fs%3DDVI%26src%3D9 - Displayport -> VGA running 50m cable Thanks, Mitch
Hi Is it possible to get 3 different DVI outputs from an AMD 6870 card? When I connect 2 displays on DVI ports and one other via a Mini Display Port to DVI, Catalyst software tells that only 2 of them can be active. I can get 3 VGA outs though... Regards Efe Ersoy
Has anyone tried using the Blackmagic DVI Extender to display a 1080 Watchout image through Panasonic HD switcher? Can Watchout be set to interlace? I've been able to adjust the display computer display settings so that when it is not running Watchout it appears to work fine (I'm testing by going through the SDI input on a Kona Lhe card into Final Cut, 1080i 59.97). When I start Watchout, the image stretches vertically - what I'd expect from a progressive signal going into interlaced. We have the Radeon 5500 series set to 1080i with the refresh rate of 29hz (instructions from Blackmagic tech support) to get to the 59.97 output. Getting the EDID has been a pain - plug it until it works - I have a Gefen DVI Detective coming in today which should help. Any thoughts? Thanks, James