Search the Community
Showing results for tags 'ION'.
Found 2 results
In the past, we've always had great luck triggering the main timeline using MSC from our ETC Ion (and before it our Obsession). On this show, I had an element that needed to be triggered on cue, while the rest of the timeline was still running. My solution to this withing Watchout was simply to put this extra element in an Aux Timeline. That's when I started to run into problems with the midi. If I set my "Midi Playlist" setting to "ignore", nothing happens. If I set it to "Map to Main Timeline" I can't trigger the aux timeline. If I set it to "Map to Aux Timelines" I can't trigger the main. My first try was to make a timeline called "1" that had all the midi triggers and it, in turn, trigged the main or aux timeline as appropriate. This was intermittently dropping cues, though. I tried putting all the content in timeline "1" and the extra element in timeline "2" but that was still inconsistent. Has anyone run in to this in the past? Ultimately, this became a convenient way to convince the director that this particular cue was a poor choice, but it is something I would like to be able to do in the future. We're running 5.5.1 on Windows 7sp1 Jim
These are the settings that we always set up in the IOS or EON family of ETC lighting desks for successful Midi Show Control (MSC) of Watchout. SMPTE Time Code RX - Enabled MIDI Time Code RX - Enabled Resync Frames - 2 MSC Receive - Disabled (Unless you want to receive MSC from another device, but Watchout doesn't send MSC) NSC Receive Channel - 0 ACN MIDI RX ID - 1 MSC Transmit - Enabled MSC Transmit Channel - 0 ACN MIDI TX ID - 1 (Or whatever you have your device ID set to in Watchout.) Analog Input - Enabled Relay Output - Enabled Serial Enable - Enabled Serial Group ID - 1 A key setting to pay attention to is the TX ID. This is the device ID and it must match the device ID set in Watchout. After all of this is set, you should be able to just set your Control Cues to match the numbers of the cue stack in the lighting desk, and be successfully tracking Midi Show Control. Hope this is helpful.