Search the Community
Showing results for tags 'slow'.
Hello. Dumb question, with slow transfer speeds between tranfering content to the production computer, then waiting for the production computer to transfer content to the display... Is there anything wrong with transfering content directly to the display computer as well?
I have 5 display Watchout 5,5 computers on a gigabit network, all running windows 7 64 bit, and tweaked from the guide here at the forum. The switch is a Netgear Prosafe JGS516, and the computers have Cat 7+ cables for connection. (overkill I know) When I upload files, I only get transfer rates on about 25-30MB per second. That is far from the 125MB the Gigabit network should provide. What is your experience from your systems? Is 30MB what we can expect? I have tried several other switches without any luck. So my next move is to try teaming 2 network adaptors and hopefully get twice the speed.
Hello, I work for a video company in Argentina. We have WO 5.1. We recently did a mapping projection with 13 displays. We used 7 Display computers (2 outputs each) and a production computer. We projected 3 walls of an event conference room. The main project size was 12595px X 553px. We splited that main video in 7 parts according to the diferent blendings and wall sizes. At the same time, the main video lenght was 40 minutes separated in 8 five minutes parts. The 7 videos sizes were: 2 videos of 2662x417 splited in 2 parts of 1331x417 each. 3 videos of 1843x553. The codec (converted with Procoder 3) used was: - Mpeg2: .m2v - 25 fps - interlacing = lower field first - bitrate = 24.000 Audio: - 2 separate audio tracks WAV (16 bit, 44.100) Production computer and display computers: - Intel Core i7 3.07gHz - ram = 2gb - win 7 32 bit - Ati radeon HD 5670 - Windows 7 32 Bit Here is the issue. Each time we loaded a video in the timeline, the response speed of Watchout slowed a bit. When we completed loading all the videos in the WO project, everything became SO slow. I mean, when we press play, the video runs perfectly in all the displays but when we press the space bar to pause the playback it takes about 15 secs (or more) for the video to stop. If we wanted to move the cues of the timeline it also worked extremely slow. We rebooted all the computers, and reopened the project with same results. During the essays we pressed play and the video playback was ok until minute 35 (of 40) when the displays started to loose a bit of synchronization. To avoid this we inserted a pause and play cue in the middle of the video and that worked to avoid desynchronization. Yesterday i tried to do all the project again and tested performance. When i loaded about 4 videos of this kind in the timeline, i saw a bit of latency in the production computer to pause playback, resize cues, scroll the timeline, etc. I hope you can understand me (my English is not the best). If anyone see what things we are doing wrong or what could be our problem please answer this topic. Thanks in advance. Julián.