Jump to content
Dataton Forum
mindopera

WO loses fourth video channel on certain images

Recommended Posts

I had this issue back in October.  I have never seen this before or after this particular show.   

The issue was when the play-head reached a particular images or videos the fourth display output of four displays completely lost its signal.  I had two images and one video that had this issue.  Although I worked with Jim Kelner and Paul Johnson to isolate the issue before the show, we never pinpointed the exact cause of the signal drop.  We were able to keep it from happening during the event by using the scale tween to flip the image or video horizontally.  Once the media was flipped it behaved as expected.

 

I have spent some time today replicating the issue in my office and tracking down the problem.  At first, I thought it was a file issue because I was able to get the display signal to turn on if I tweened the file to flip horizontally in WO as well as turning off certain layers in the original photoshop file of the media in question.   Ultimately I believe I found what was causing the issue.  I had not set the fourth display in the correct stage position.  I had placed display four, 4 pixels (stage position 4808px should have been 4804 px) too far to the right and that's why in my video I'm able to snap the photoshop file in either direction.  If it was set in the correct place it would only snap to the left.   I went back to the original file with all the media and changed the pixel position, took the flip tween off and then everything worked perfectly.

 

https://www.dropbox.com/s/p78sv2hakzc0ow4/20171215_170053.mp4?dl=0

 

I am still stumped why certain files had the issue and other still and video files didn't. 

Any feedback or ideas on this issue are appreciated.

 

 

 

 

 

 

Share this post


Link to post
Share on other sites

Hi, which version of WATCHOUT did you use? If you can send a dropbox link to a show that displays this problem to support@dataton.com we can have a look at it. I also assume that the signal isn't lost to the display but that WATCHOUT renders only the background (transmits only black pixels to the display).

Share this post


Link to post
Share on other sites

It happened originally in WO version 6.1.6 and the test I did in my office was in version 6.2.

When screen four goes black it is because it is no longer sending the video signal. If there are any other graphics above that image they drop out as well. I was using a simple version of my original file to test with an I will send that to you at the support email.

Share this post


Link to post
Share on other sites

Here is the computer info.

  • Intel I7 X980 @ 3.33 GHz
  • 12GB of RAM
  • Windows 7 Pro 64 bit (tweaked)
  • OCZ-Vertex3 ATA SSD 240Gb (original)
  • 2- 250gb 850 EVO - Raid 0 = 500GB (New)
  • AMD FirePro W7100

Driver Packaging Version: AMD 15.201.2401-151104a-296716C-Retail_End_User

 

AMD%20Driver.JPG?dl=0

AMD%20Driver.JPG?dl=0

All connections were thoroughly vetted.  I have 4 identical computers running it and each had the exact issue occur.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...