Jump to content
Dataton Forum
Rogier Tuinte

Delay before video input becomes active

Recommended Posts

Hello,

 

We've a display computer with windows 7, watchout version 5, a blackmagic intensity pro and osprey 440 capture card.

The display machine is online. When we jump to a live video cue on the timeline (both HDMI or one of the video inputs from the 440 card) it takes a few seconds before the feed is visible on the output.

If we jump to other (non live video) media elements, the machine responds normal.

Also when I press update, the live video feed on the output freeze for a few seconds.

Once when the live video is active, it responds normal to opacity changes with an external input.

 

Rogier

Share this post


Link to post
Share on other sites

Hi guys,

i have the same problem. I sent my issue to support like you suggested and i still haven't got any answers back.

I was wondering if someone else got th esame problem and what was the solution or work around.

 

thanks

Share this post


Link to post
Share on other sites

Hi all,

 

We've discovered an issue with capture delay, when Datapath AND any Blackmagic card,

Decklink or Intensity OR even only the drivers for them, is installed at the same time.

As soon as the Blackmagic hardware/software is uninstalled, capture seems OK again.

This is under investigation at the moment. Just wanted to give you a heads up on this.

 

Share this post


Link to post
Share on other sites

Hi all.

We use Datapath RGB capture card and Osprey 210 composite capture card. When we switch to live, we see delay.

We have problem, that master computer freezes too often and only solution is testart master computer. Displays working correctly.

Is it connected with issue writen above?

Matej Streba

Share this post


Link to post
Share on other sites

when Datapath AND any Blackmagic card,Decklink or Intensity OR even only the drivers for them, is installed at the same time.As soon ...

 

Please update if they will release any (beta) driver update that will improve this.

Tx

Share this post


Link to post
Share on other sites

We sometimes encounter delays when jumping in the timeline. an easy solution is to place a video input on top of your complete show, decrease opacity to 0 so that the video signal is permanently shown inside your show - just invisible...just in case somebody wants a quick fix without having to wait for any driver updates...

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...