Jump to content
Dataton Forum
Carol

Timecode From Display Computer

Recommended Posts

Hi,

I have the question about timecode. Could anyone provide me any solution?

There are some devices of my cluster system:

item

spec

Qty.

Display Computer

Dataton 3368B Watchpax 60

2

Production Computer

Intel Core i5, OpenGL 2.1, 16GB RAM, 500 GB HDD

1

Timecode Interface

Rosendahl Studiotechnik mif4

1

 

I expect that I can output the timecode signal of mif4 to the audio card of display computer 1, and then the two display computers can follow the timecode to play the show at the same time.

And I also expect the production computer only be used for the preceding procedures. During the show we won’t turn on or use the production computer.

 

I’ve added the timecodeMode script in the startup script and also set the audio card of display computer 1 to receive the timecode signal.

How can we reach my expectation to use the whole system?

Share this post


Link to post
Share on other sites

Hi Carol,

Yes your requirement can be achieved.

1. configure the Timecode pull down menu of Wpax60 to receive Timecode from the sound card.

2. Connect external Timecode to Audio input 1 of the multi-core cable (the DIN to 4 pairs of XLR cannon plugs)

3. In the start up script of the Wpax60, set it to run on cluster and stop or pause at a point of the main timeline to wait for external Timecode 

4. In the start up script of the Wpax60, activate the Timecode input by selecting the kind of Timecode being fed in SMPTE/EBU, 24fps or 29.97hz etc.

5. Save the edited start up script and relaunch the Wpax60. 

Play the Timecode from the MIF4, The show’s timeline will follow the Timecode fed in, off-set of the Timecode input can be prescribed in the startup script.

You only need to feed Timecode to the Wpax60 running the start up script, not both units.

You may have to adjust the input volume to make the Timecode heard by the Wpax60.

Try and let us know if you require any further information.

best

ken

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...