output fail WO 6 Display Not Reloading

[Pixelmapio]

Hi I have problem with watchout display reloading again and again not getting ready 

it only happens when i give all 4 output 4k.

if it is only 1 or 2 output then no problem

Version 6.7.3

Nvidia p4000 quadro

i have tried with different watchout version & nvidia driver version

 

windows 10 pro 

All tweeks and tween with update

[Walter]

How is your connection to the displays? DP->DP?  Or DP->HDMI?  If so, using active adapters?

Is the windows desktop showing on all 4 outs correctly and have you checked resolution AND framerate on the displays?

 

[Pixelmapio]

How is your connection to the displays? DP->DP?  Or DP->HDMI?  If so, using active adapters?

Ans : Yes  startech active adapter Hdmi to hdmi

Is the windows desktop showing on all 4 outs correctly and have you checked resolution AND framerate on the displays?

Yes All 4 output shows correct resolution in windows 

 

sometimes if i load display through (WP.exe ) it works but if remote access and relaunch then problem start again to reload displays 

 

if somehow its reloaded never give problem during shows 

[Walter]

You could try load an EDID file on the outputs and see if that helps. https://www.nvidia.com/content/Control-Panel-Help/vLatest/en-us/mergedProjects/nvwks/To_force_an_EDID_at_a_display_connection.htm
You can create the correct EDID file using AW Edid editor or Lightware Device Controller software.