[No Datapath capture with WO6]

This error message indicates that your input number mapping isn't set properly. Make sure the input number you use is correctly mapped to the proper capture device. In the display software, this is done on the Video In menu, as described here:

 

   http://academy.dataton.com/wo6/Menus.xhtml#Anchor

Dear Mike,

 

Thank you for your advice. Before the update was working goed but after the update to WO6 for some reason change the input mapping. The card is now working but no in RGB mode. Like Walter wrote only works in another input mode. Anyway thank you.

Best regards,

 

Guillermo

[No Datapath capture with WO6]

7.8 drivers from datapath works, I just tested.

 

Regards

 

Adela

Hi Adela,

 

I tried everything but still does not work. New drivers, old drivers, other device number, other input mode, enz. Windows up to date. In the Vision application I can see the image from the captured computer but in WO 6 does not appears. Only the following message: Runtime error; Video input device not specified: 1; Live media computer of media list.

I checked in the watchpoint en de device number is correct. This problem appears sinds the update from WO5 to WO6. Any more suggestions?.

I hope for another solution, otherwise I bring the server to Jan - AVtrade.

Anyway thank you for your co-operation.

Best regards,

 

Guillermo

[No Datapath capture with WO6]

Hello,

 

I just upgrade the drivers from the Vision RGB-E1S, I also upgrade WO 6 to WO 6.0.1 but I do not get picture from this card onto my output. II tried different settings, different input mode, but still does not work. It works with the Datapath application but not in WO. Any other suggestions to solve this issue?

Thank you.

Best regards,

 

Guillermo