Pablo
-
Posts
9 -
Joined
-
Last visited
Posts posted by Pablo
-
-
Good afternoon, did you get a solution?
0 -
Good afternoon, did you get a solution?
0 -
Depending on the vendor, the RX480 can drive up to 5 outputs. I'm running a Sapphire RX480 8G and it has 2 x DP, 2 x HDMI2.0 and 1x DVI DL. I've gotten 5 x 1080p outs no problem, and 2 x 4k30. But no support for the S400 sync module though (not an issue with our uses, but may be necessary for yours)
Very good! This graphics card has the lowest price between 8 GB.
0 -
Were they able to solve the problem? What version of Watchout do you use?
0 -
Thanks for the information, I'll try to find a current board with 6 outputs.
If you have any suggestions, I thank you.0 -
Since version 6.1 the displays can have different resolutions but NOT different frame rates.
See the release notes:
- Displays connected to the same display computer can now have different resolutions.
Using multiple outputs with different graphics cards some change with version 6?
0 -
No, using an MST hub till not allow you to go beyond the maximum of 6 displays per computer. Besides, many MST hubs introduce their own challenges, often complicating the matter of getting several displays to "behave" reliably when connected to one computer.
Hello mikeAnd with two plates with three outputs, stability improves?With two AMD RADEON RX480 for example?0 -
Good afternoon my friends, I'm typing from Brazil.
My question is, what if they use two AMD Radeon RX 480?It would have the same 6 displays at a lower cost.0
WO And Intensity Pro Problem
in WATCHOUT FORUM
Posted
Good morning people.
With Watchout 6 and an Intensity Pro 4K capture. In tests I was able to run the capture normally in 1080P 60hz and even in 2160P 30hz. But now with the timeline ready, there's no way it works. Media Express receiving normally, but in WO not.
Does anyone know how to solve?