avone
-
Posts
3 -
Joined
-
Last visited
Posts posted by avone
-
-
Hi All, I am reinstalling my WO program for the first time on my production & display Pc. And Need A little Help.
How do I tell the display PC that it is I just a display PC and not a production machine?
Thanks
0 -
Hi all,
I just have a quick question about out putting signals and changing the display resolution.
I have a show coming up where I have 6 x 1920 x 1080 projectors . Two of these projectors will be projecting onto standard 16/9 screen surfaces. The other four will be projecting onto a skinny vertical screens
The resolutions of these screens are as follows:
Screen Set 1 = 2 x projectors with 2 x vertical projection surfaces 480w x 1080h.
Screen Set 2 = 2 x projectors with 2 x vertical projection surfaces 720w x 1080h.
So my question to you is this. In watch out if I deselect the little checkbox that says "width & hight same as display resolution" I should only be seeing on that particular output the prescribed resolution above.
But at the moment it appears that it is stretching to full for 1920 x 1080 and not just give me my content in the middle of the screen with black bars left and right.
Am i doing this right?
thanks
0
Reinstalling software for the first time
in WATCHOUT FORUM
Posted
Thanks Jonas,
Sorry for the silly questions but really wanting to have a good grassroots understanding from the ground up as I develop myself in this amazing skill