zaharbaz
-
Posts
8 -
Joined
-
Last visited
Posts posted by zaharbaz
-
-
As I understand, wx7100 is a replacement for the w7100. And for the w8100 there is still no replacement, does it make sense now to buy the w8100 instead of the new wx7100?
0 -
I need to have a minimum of 2 hdmi inputs and 1 sdi input at the same timeI wanted to buy two DeckLink Mini Recorder 4K cards, but then I found out that in each of them you can use only one input.It is not possible to find information on other cards, where you can use as many inputs as you want.Maybe my way, this is 2 Intensity Pro 4K and one Decklink Mini Recorder 4KHelp me with choosing a capture card. I would not want more than $ 1000 in total.My videocard is w8100, if it's importantThank you0
-
- Can you set up your graphic card under Windows (without WATCHOUT) to send out 3x or 4x 1920x1080@50/60fps?
- Once this works, check your encoding to find the best settings to play 4x fullHD.
For the test, I reproduced a 1080p (mp4 | h.264 | 10mbit/s) movie in three players (VLC, WMP, MPC) on three screens at the same time. Periodically I watched some lags or dissynchronization between parts of one screen. Unpleasant to the eyes.Reproducing the same movie on three screens in Watchout, the lags became larger.I have two such cards, I decided to sell them and buy one FirePro W8100. I hope I have time, for some reason they stopped selling.I hope this is the right decision0 -
On the other hand, WATCHOUT renders most video content on the CPU (which model are you using here?) and even rather small graphic cards can play 2-3 1080p60 signals if BIOS, drivers and physical ports allow for this.
I use Core I7-5930K 3.5Ghz
Maybe this CPU slow for Watchout?
If i sell these cards and buy FirePro W8100, will i get disired 4 screens in 1920x1080 width ~50fps ?
0 -
HelloI use the Quadro k4200 videocardIn the specifications it is indicated that the card can work with 4 displays (using Mst)Or 3 displays (2 DP + 1 DVI).When I connect 3 displays, the maximum resolution I get is only 720p each. In this case, if I run 3 videos in 1080p, Watchout have very low fps width all videos (mp4/h.264)After I took another such card and unified it in the SLI, but did not notice an increase in performance.Is this normal behavior for this graphics card or am I having problems?my pc:Intel Core i7asus x99-addr-3 16gbssdMaybe the Watchout is not as well optimized with nvidia as with amd?If this is the normal performance for this graphics card, can I sell these cards and buy one firepro?Ideally, I would like to have 4 outputs in 1080p without lags, with adequate FPSThank you and sorry for my eng0
-
HelloI use the Quadro k4200 videocardIn the specifications it is indicated that the card can work with 4 displays (using Mst)Or 3 displays (2 DP + 1 DVI).When I connect 3 displays, the maximum resolution I get is only 720p each. In this case, if I run 3 videos in 1080p, the Watchout have low fps, all videos width lag. (mp4/h264)After I took another such card and unified it in the SLI, but did not notice an increase in performance.Is this normal behavior for this graphics card or am I having problems?Maybe the Watchout is not as well optimized with nvidia as with amd?If this is the normal performance for this graphics card, can I sell these cards and buy one firepro?Ideally, I would like to have 4 outputs in 1080p without lags, with adequate fpsmy pc:Intel Core i7asus x99-addr-3 16gbssdThank you and sorry for my eng
0 -
Hello, i have this configuration:
CPU I7 K6700
MB Asus x99-a
DDR 16gb
GPU Nvidia Quadro K4200*2 in SLI mode
Watchout supports outputs only one graphics card.Each card 2 DP and 1 DVI.I need 6 outputs 1080pCan I use MST-hub to 3 DP, the two outputs of the graphics card.Will WATCHOUT work all 6 outputs?Will SLI mode to increase the overall performance?0
Сhoosing a capture card
in WATCHOUT FORUM
Posted
I do not know where you can find for such an amount. In my city they cost $2500 and $3000
I think it's so expensive