-
Posts
18 -
Joined
-
Last visited
Posts posted by Antonio Masero
-
-
-
Can someone check if they see a 1080p 25Hz and 1080p 50Hz signal in Watchout?
Other resolutions if seen, but shows black with these.
Thank you0 -
Yes, they have updated the driver and now it appears as 4 inputs.
At the moment I have only used it with 4 different 1080p inputs.
A greeting!0 -
Problem solved!
From Datapath they comment on a problem related to DirectShow filters that are not exposed correctly in the latest version of the Vision driver.
And they tell me a test:
Close the WatchPoint application. Then, in device management, you can disable the AVStream driver, then wait 5 seconds and then enable it. Then, reopen WatchPoint and see if the capture devices are working correctly. (Note: after restarting the problem will persist).
If this is successful, a patch exists so that the problem does not persist after a restart.a greeting!!
0 -
Thanks for your attention jfk!!
I have verified that just by installing the card if I can see it in the list. But when rebooting or shutting down it stops appearing.
It never shows an image anyway.
It is the only driver that exists for this card in datapaht on the official website.(VisionInstall v7.19.1)Does anyone have any suggestions? Does anyone use it in their displays?
0 -
The capture works well, I can see the inputs in Vision Windows.
The problem is that it does not appear in the "Video In" list of Watchpoint.0 -
Hello friends!!
I have created a new pc display.-Win LTSB 2016
-Motherboard ROG STRIX Z390-H
-Intel Core i79700K
-RAM DDR4 2x16Gb 3000MHz Corsair
-SSD Cruzial MX500 1000Gb
-NAND SSD Samsung 970PRO 512Gb
-RADEON PRO WX9100Everything works great with Tweaking Guide step by step.
We have installed 2 capture cards.-BlackMagic Declink 8k Pro
-Datapath VisionSC-UHD2The BlackMagic card works well (although I do not get 4 inputs, only 1 input).
The Datapath card does not seem to be configured well in watchpoint. Any ideas? Any specification to take into account?thanks
0 -
In the settings guide, see Chapter 3 "Installing cumulative update KB4090913".
As of today, is it the last update that should be done?
What version of Windows should I use?
I'm not sure if Windows 10 version 1709 is the same as LTSB 20160 -
Hello!
I have managed to use Autohotkey to make arrows to keys (T and Y)Â conversion. It's awesome!
Now I can use microcue 3Â to send commands to WO using Key to WO2.
Thank you very much!!
0 -
On 2/24/2019 at 7:25 PM, Alex Ramos said:
If your remote controller emulates the keyboard you can use my app to Run and Kill a timeline.
I coded this some time ago to use a PerfectCue as trigger for WO.
Can be used to control Production Pc or the Cluster without Production. Â
Thank you very much for the contribution!!
Can I change the key? other than just T or Y.
I think microcue3 is not configurable.0 -
My idea is to control another pc with microcue3 and from there emit signal for specific control in watchout.
But in definitive it must run when pressing next in microcue3 to trigger play in timeline.0 -
Hello
I need to run a timeline or auxiliar timeline by pressing the next button of microcue3.
Any ideas?I work on a project as a PowerPoint
thanks!!
0 -
How can I send an OSC command from Watchout to activate a playback on Chamsys MagicQ?
I'm investigating but I'm new to this.
https://secure.chamsys.co.uk/help/documentation/magicq/ch40.html
A greeting!0 -
On 15/3/2018 at 8:37 PM, actseattle said:
I abandoned Windows 10 and was able to force Windows 7 onto the rigs. Â It worked first time and has not failed yet. Â I did not have to force EDID, remote access works, everything.
Â
No Windows 10 until they release a tweak list, I say.
Completely agree with you. I have had the same problems as you.
I will not return to Win10 on my display computer until we have that list.
Many wasted hours of work for a compatibility failure.
A greeting!!0 -
I prefer MSC, but I do not reject Arnet when it comes to giving control of WATCHOUT to a lighting technician.For the moment, I only use Arnet as a simple trigger and to generate color changes in the mapping effects.It is easier for a lighting technician to program like a head. For the rest I use MSC.
0 -
I do not understand what difference there is between using MIDI or Arnet if triggering is involved.I usually use Arnet triggers to synchronize light and video.
0 -
What device do you use to test NDI inputs?
Â
thanks.
0
Add NDI with Alpha
in WATCHOUT FORUM
Posted
I skipped that step of the setup.😓
that was just my mistake.
Thank you