Mccready
-
Posts
3 -
Joined
-
Last visited
Posts posted by Mccready
-
-
Thanks for the wonderful replay.
At first, I was planning to use MSC, although, since the console and the vdo station are pretty far away from each others, i thought it would be easier to use Artnet ( video and lighting switches are in the same room. )
So, instead of midi over ethernet software abd bla bla bla, only a quick link would make the process works.
Also, if I understand what you meant, you can choose an action to a certain level in the choose channel, right? Like if 52% would be a pause.. that is it?
Thanks
0 -
I was ask if I could trigger the video cues on watchout, from the Ma1.
I know it is possible, but since i have never do it in the past, i would like to get there ready for it.
So far, both side are already integrated in the show, and working well. So from that, i was told to only link both network, and add a artnet controller in watchout ( which would automaticaly add the 2.x.y.z ip address ).
From that, how is watchout reading the dmx data in order to trigger a cue? What options do I have with artnet triggering? Can i pause or do any other actions? Does anyone have a sheet with some infos?
Also, anyone did that in the past and have some tips for me?
Thanks!
0
Grandma 1 triggering Watchout 5.2 thru Artnet
in WATCHOUT FORUM
Posted
JFK;
I am not fighting against MSC, although Artnet is physically and technically easier in our environment.
I have completed the first process through Artnet, but I am no facing a problem. Options you can trigger using Artnet are very limited.
I am now trying to use MSC thru Ethernet, but I've got not answer from Watchout Production.
Here is where I am now;
------------------
SETTINGS ;
Here are my GrandMA1 settings;
Under Tools/Midi Show Control;
Midi Out;
Device = 1
Group ID = 1
Send o ALL
Port: 21928
Ethernet Enabled
MSC Command: ALL
Executor: Default
I am using IPMIDI on Watchout Prod with Port 1 opened.
Disabled all the firewalls
Here are my Watchout settings;
Preferences;
Control;
Midi Show Control, Device ID = 1
MSC Cue Lists: Map All To Main Timeline
------------------
Questions;
1. In Watchout, which input do I use to read the MSC ?
2. In GMa1, I created a sequences which I selected to turn it Default. How am I suppose to send command using it ?
I will use Midi-OX tomorrow in order to get more infos about what is sent.
Thanks