RobinSkarp
-
Posts
7 -
Joined
-
Last visited
Posts posted by RobinSkarp
-
-
Hello again,
so I tried the solo 1i1 and it worked fine. And then just stopped working fine. It’s so inconsistent. (2nd gen)
so I switched to my gigaport hd+ and the same cracking noice when I play audio with free run and loop active.
Can’t set the sound card to 48 kHz either. Only 41,800 and auto.
Any one had the same problems?
it’s a watchpax 60 (without internal sound card)
0 -
So, focusrite says that it’s the same drivers. So that shouldn’t be the issue.
But I still can’t get the 4i4 to work smoothly.
anny suggestions?
0 -
And i sent an email to focusrite as well
0 -
5 hours ago, jfk said:
That would be a great question to ask Focusrite.
Are you asking about a 3368S WATCHPAX 60S or one of the other three WATCHPAX 60 models?
I am using the 60 basic models with no Sound card.
0 -
Hi,
Can’t get the focusrite scarlet 4i4 to work properly on my watch pax 60 servers.
I get audio. But when I stop the timeline there is a digital break sound, and if I have free run on. It stops the audio. ( all files are correct) and it works fine with scarlet 1i1 2-gen.
I can’t find any info if it should work, except the scarlet 18i20 install guide. My guess is that it uses the same driver?
0 -
Avolites only supports MIDI or DMX, not Artnet. As input triggers.
You could use a artnet>DMX converter to get a dmx output from WO.
0
Remote vs manual aux timeline trigger = different behavior
in WATCHOUT FORUM
Posted
I have the same issue,
I usually trigger Tasks from main timeline, but experience the same problem.
But when i use Companion to trigger the aux it works.
= Workaround
Send a UDP command to "press button" on streamdeck on the timeline instead.
(Add an output in WO "UDP" and activate UDP control in companion)