bambam
-
Posts
18 -
Joined
-
Last visited
Posts posted by bambam
-
-
camera calibration is the best way and easy way . vioso or domeprojection supports dataton.I have done similar project but we didnt use dataton.but i know dataton supports vioso.my opinion 3d is hard way .if you have budget best way camera calibration also fastest way.
0 -
we are using the asus sage x299 graphics card wx7100 2019 LTSC, I also had the same problem.in general, it was happening in alpha videos.what's more interesting is that when I applied the same tweak to the dell T-5820 server (rtx a4000), it worked perfectly.
Adjunct Prefetch: OFF
Hardware Prefetcher:the OFF Try these settings from bios and it will probably be fine..i solved it this way
0 -
I would prefer xenon platform instead of high-end intel i7. Even if i7 is better in performance, it is more important for me to be stable. Also, if you are using hap codec, your processor is not very important. Graphics card and ssd do all the work. You can handle most projects with a fast ssd and video card.rtx A series is a good choice.i have been using rtx a 4000 for 8 month without a problem .we also use wx 7100 without problem but its a old card new amd card has a driver problem.we use Datapath and magewell capture card and both of them works well
0 -
I've been using ryzen 5800h for 6 months. I haven't had any problems. My only advice is if you're going to use softedge blending, have a powerful graphics card.By the way, because I don't like win 11, I used it by installing win 10. But win 11 also works stable
0 -
On 11/16/2021 at 4:24 AM, dodoso said:
Hi everyone,
has anybody have a solution for this:
I've WO6 (6.6.5 version) and computer gpu is GTX 3070 and 3090. I've seen this problem over past few times. I drop a MP4 file on the timeline and set up free running and looping.
I was started the timeline and after few hours, the video looping was stopped or has stuttered in the LED and also production computer live part view.
However, there is no error message.
So, I tried to online again, but it still not working well.
How can I solve this problems?
my advice is to use hap codec mov instead of h 264 codec mp4.dataton makes the same suggestion for loop videos.
0 -
i think problem could be wx 8200 driver .i have no experience with 8200 but we use wx 7100 in our server .when we first build the system and used latest driver .we faced smilar problem.after trying various driver finally we decided 2018 q2 driver(everyone says best one is Q42017)
0 -
On 4/4/2021 at 4:53 PM, jfk said:
Isn’t that a link to only the current versions? Isn’t Windows Enterprise LTSB 2016 (1607) the ‘proper version’ for WATCHOUT?
you are right. this is new version .right now i am uploading ltsb 2016 but i am not shure you can buy 1607 activations key.its 4,5 gb and my upload speed is terrible.i will share download link after upload prosess completed
edit:https://www.sendgb.com/upload/?utm_source=85nvqRStIrA&utm_medium=kN5Jeql83YALuz9
0 -
On 4/1/2021 at 8:46 AM, christopherav said:
Hello guys,
is it possible that someone can add a link to proper win 10 enterprise OS link , which is recommended by watchout,, it will be help-full for those who want to upgrade.. its difficult to find right win 10 version.. i been tried few times and got unsuccessful..
0 -
I think there is no such thing as the best hardware or the best windows version. For example, most people in the forum say that the ltsb and ltsc versions are stable.but in my opinion win 10 pro is stable and same situation for wx7100 driver most people say 2017 q4 driver is the best but for me its not.what i mean if you have time for testing system so build your own server. otherwise i advise watchmax or watchpax
cpu:i9 7920x
mobo:asus sage ws x299
ram:8x4 corsair ram
ssd:500 gb samsung 970 evo plus for dataton
ssd :500 gb samsung 860 pro for OS
graphics card:wx7100
I have built this system two years ago i tried win ltsb and didnt work i tried ltsc didnt work after ten days i made it with win 10 pro.
every user has different experience with hardware and OS.
as i sad before if you have time build your own server otherwise buy watchmax or watchpax
0 -
can someone (who lives in asia region) record workshop and upload youtube or another website. Because normal people sleep at 4am 😉
0 -
in my experience best radeon driver is 17.q4.1. not latest driver. i never had experience Newtek PTZ1 cameras but 2 ndi camera may force network if you use 1 gb ethernet card .two Newtek PTZ1 take over 200 Mb/s of bandwidth.so it a big problem.As i sad never experience ptz1 but i used via ndi 3 laptop same network with 10 gb ethernet card.
0 -
you need blackmagic web presenter or another product like web presenter .its working with zoom i have done this several times .connect one of wo output to web presenter and zoom computer determine watcout signal as a webcam.
0 -
you need 2 pc (has 4k output) for presentation and seperate power point two equal piece and also you need 2 4k capture card(or one capture card has two input) to capture presentation and finally you need Cuelight Master Cue its a remote controller that you can control two presentation at the same time .i never try like that before in theory it must work .but i think too risky because of synchronization
0 -
On 2/14/2020 at 11:53 AM, David Laser said:
if you only use 4 output you dont need wx9100 .i never try rtx 5000 but its expensive now. i prefer wx7100 or p4000 quadro both of them stable cards.i have been using samsung 970 pro with active cooler and until now never see overheat problem but if you are planning to use hap codec definitly buy Samsung PM1725b. i have two server pc and config like
i9 7900x
asus sage x299 ws other one
32 gb corsair ram 3200 mhz
Noctua NH-U9DX i4, Premium CPU Cooler for Intel Xeon LGA20xx
samsung 970 pro for dataton
samsung 860 for os
and active cooler for m2 ssd
OS: win 10 ltsb 1607
we use this config. and never an issue
0 -
On 10/30/2019 at 12:26 PM, HouseofGusto said:
Currently any chipset available for Intel platform supports a maximum of 24 PCI-e lanes. Therefore, it doesn't matter how many lanes the CPU supports. Any reasonably priced Intel setup be it consumer or server grade, is limited to 24 lanes.
For instance, the display PC in piccinaezio's example has 24 on board. AMD Pro WX9100 uses 16, Datapath VisionRGB-E-S2 uses 4, BM Declink uses 8, each Samsung NVMe SSDs use 4 lanes of PCI-e lanes, in total one would need 36 lanes supported by the chipset in order to realize the full potential of the hardware listed.
So, there always be compromises in setup and performance of any WO server, including Dataton's own.
This is why it is crucial to get the OS and BIOS perfectly tuned for achieving least amount of bottleneck, especially for complex setups with demanding media files.
Thats not correct check Asus ws sage x299 İts support 4 ways slı and crossfire full performance with correct cpu
you can check it from https://www.asus.com/us/Motherboards/WS-X299-SAGE/
0 -
if i were you i prefer x299 platform because of max pci lanes . 9900k has only 16 pci lanes(wx9100 use 16 pci lanes) for example i7 9800x has 44 pci lanes it means in the future if you want to add uour system capture card your gpu works 8x speed . normally it works 16x . and other reason is ram z390 has dual channel x299 platform has quad channel ram .as a result it depends on what you need if you dont need use capture card you can use this system. finally samsung m2 ssd works hot .you should buy m2 ssd cooler .
0 -
hi to all our pc config:
asus ws x299 sage
7900x intel i9
32 gb ram
wx 7100 graphics
samsung 860 evo for OS win 10 1607 Enterprise LTSB and the update KB4057142.
samsung 970 evo for Watchout
2 datapath capture card
my problem is when i go online(only first time)
there is error message like this
of Stage Tier "Base" of StageList of Stage, 2019-07-19 21:58:08
Warning: Changed frequency from 60Hz to 59Hz.actualy everything works good after go online but every time when i go online i see this error message its annoying is there any way to solve this problem
thanks...
0
Possible bug in version 7.1.1
in WATCHOUT FORUM
Posted
I have been testing Wo7 for 2 days. The test system is W-2255 processor, RTX A4000 and 2 datapath capture cards (SD12 and LC series HDMI) and Magewell HDMI plus USB capture. There is a visible increase in performance. The only problem I can see is if you turn off the producer somehow. The display continues to work and when you open the producer again, you cannot cancel the current task. It continues to work, this is the only error I can see so far.
In addition, for big shows, the producer's computer must be a powerful computer, not during the show, but during the preparation phase. Of course, if you are not going to use a separate computer as an asset.