[4х4K Capture]

Hi!

Here is Datapath support answer about VisionSC-HD4+:

The VisionSC-HD4+ is HDMI 1.4 capable so according to this the maximum capture resolution would be 3840x2160@30

However, for Inputs 1&3 we have added support for 3840x2160@60 using reduced colour format only (Chroma subsampling YUV 420)

 

Any other ideas about 4x4K capture cards?

[4х4K Capture]

Thank you for your answers!

On 5/1/2018 at 9:12 PM, Thomas Leong said:

In the first place, BEFORE you buy, you should clear up an anomaly with Datapath re their Datapath SC-HD4+. The specs say Ch 1 & 2 support 3840x2160 at 60Hz, but the pdf fact sheet in the description write up states two channels support 3840x2160 at 30Hz.

 

In my own tests recently with a Philips UHD monitor, I could not get 60Hz with HDMI 1.4. Upped the DP-HDMI adapter to HDMI 2.0 and voila!...3840x2160 at 60Hz!!...and action video (a soccer match between Barcelona and Atletico Madrid obtained from the internet) was much much smoother.

 

Thanks, I asked Datapath's support, but in any case I tend to Magewell cards.

On 5/2/2018 at 1:54 PM, DavidA said:

On a Windows 7 machine you are limited, as Quim says, to 3x4K outputs. But on Windows 10 that is not a problem with the AMD drivers anymore. 

Yes, I know, thank you, David

In this case, I am most worried about the simultaneous work.

 

[4х4K Capture]

Hi Everyone, we have such case:

4 outputs 3840x2160 60Hz and 4 inputs 3840x2160 60Hz 

Hardware: X99, Intel i7 5930K, 16Gb DDR4, 2xSSD RAID0, WX7100

For capturing we want to use 

Datapath SC-HD4+ x2 (HDMI 1.4)

or

Magewell Pro Capture HDMI 4K Plus x4 (HDMI 2.0)

 

What are you thinking about simultaneous work of cards and latency time?

 

 

[Light control Command]

Many, many thanks!

It's works!

 

I haven't used either the D3 or the Butlers, but if I had to guess, I would say the first and last bits are encoded decimal values.  

 

Try changing this:

\62V:1,C:11,G:9,B:1,S:1,F:500\35 

 

To this:

>V:1,C:11,G:9,B:1,S:1,F:500#

 

--D 

[Light control Command]

Thank you!

We have already tried to use telnet via Putty, but only TCP Port (by UDP Port was reboot) - no effect too. And no answers too.

[Light control Command]

Hi everyone!

I've got some troubles with control commands.

We 've got Butler xt2 & commands for turning the light on and off.

TCP Port 50000

UDP Port 50001

 

Commands are:

On:

\62V:1,C:11,G:9,B:1,S:1,F:500\35

 

Off:

\62V:1,C:11,G:9,B:1,S:15,F:500\35

 

There are no message errors, but we' ve got no effect too.

How can I change commands to make them correct in Watchout?

Tried to change TPC/UDP, to add $0A & $0D - no effect.

 

From D3 server these commands are working.

[WO Remote]

Hello everyone,

 

Our company's been running a few tests with a few different machines and versions of Watchout 5 / 6, and we've noticed that the WO Remote (https://www.dataton.com/files/watchout/remote) doesn't work on v6. 

 

Can somebody confirm this feature is deprecated?

 

Thanks!

 

 

Hello!

I already faced this problem! Perhaps it's the new update of Chrome. Try using Dolphin or UC Browser - this should help!