Hi jfk
I really appreciate your help. I have tried to make pics of my process. Let me know if this is unclear.
On the WatchPax 60 I create a custom resolution of 4224x1308 50hz.
See pic: 00 Nvidia Custom Resolution
And pic: 01 Nvidia Control Panel
My Display controller detects this resolution output correctly.
See pic: 02 Novastar Controller
My LED screen is able to output this resolution correctly
See pic: 03 Screen with Nvidia Info
The Watchout Node software is also able to output this resolution.
See pic: 04 Screen with WatchOut Logo
I then create an Display Output in my WatchOut show.
See pic: 05 WatchOut Show Output Configuration
But when I go Online my WatchOut show fails.
See pic: 06 WatchOut Show Error
And pic: 07 WatchOut Node Error
Hi jfk
It is a WatchPax 60, and the machine is able to output the correct resolution on the led screen.
But when I try to start the Watchout show, I get the error.
I don't know how I can find out what EDID settings to tweak....
This is still bugging me.
The WatchPax dosn't really see my display resolution as I connect to it through a Lightware MX2 HDMI matrix.
When I remote access to the WatchPax and create the custom resolution of 4224x1308 50hz then I have signal on my display.
When I take a HP Z4 with RTX4000 and do the same I have no issues using the same 10m Displayport to HDMI cable.
But whenever I try to go online with my show it fails with the "Display Setting not available".
And a side question.
Does anyone know hot to prevent the WatchPax from rearranging the displayport numbering when adding or removing outputs?
It seems to shuffle them around randomly, and when we have a monitor on port 1 for the sole purpose of monitoring it is quite annoying.
Any help is appreciated.
Hi jfk
Thanks for your reply.
I was in fact trying to convert displayport to hdmi, but using an active cable.
Now I have placed a screen right next to the WatchPax 60 and running displayport to displayport and with the same error.
Everytime I try to set the resolution to more than 1920x1080 I will get the error.
Hi.
when I try to set a displayport output resolution above 1920x1080 I get an error:
"Rendering error:5; Command: Activate; Display setting not available”
Can anyone point me in the right direction?
thanks