Ogge Posted February 14, 2018 Report Share Posted February 14, 2018 Hi everyone, I've got a weird issue here with Chamsys little artnet to dmx box when trying to control it from Watchout. I have 20m LED-strip which is controlled by a little DMX box that receives signal from the Snakesys B4. If I'm using the virtual lighting desk "magicQ" and sending on Universe 0 and channel 1,2,3. That works great and watchout receives signal on "DMX input". If I however send from watchout on universe 0 and channel 1,2,3 Watchout still detects signal on the "DMX input" however the LED-strip doesn't light up no matter which values are sent... Anyone got any ideas? Quote Link to comment Share on other sites More sharing options...
zackboyd Posted February 14, 2018 Report Share Posted February 14, 2018 Try this thread: http://forum.dataton.com/topic/2827-control-dmx-channels-with-artnet/?hl=artnet Quote Link to comment Share on other sites More sharing options...
Ogge Posted February 15, 2018 Author Report Share Posted February 15, 2018 Thank you Zack! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.