artLab Posted March 28, 2019 Report Share Posted March 28, 2019 Hey gang - I'm using two projectors on three surfaces. One upstage and two legs about 24" downstage. I need to project on all three surfaces and edge blend them but I can't seem to get a good edge on both the upstage and downstage surfaces. So when I blend the upstage surface, the DS legs are off and vice versa. The blend is in the display so there's two displays on top of each other but the throw is different from the DS legs to the US drop. Do I need to set this up in 3D? Can I blend across each surface as opposed to each projector? Thanks for your help. 0 Quote Link to comment Share on other sites More sharing options...
zackboyd Posted March 28, 2019 Report Share Posted March 28, 2019 Try using masks rather than blend. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.