Jump to content

kai

Member
 View Profile  See their activity

  • Posts

    39

  • Joined

  • Last visited

 Content Type 

Posts posted by kai

  1. any suggestion to use WO to play media content 13824x3465 pixel resolution

    in WATCHOUT FORUM

    Posted

    2 hours ago, matkeane said:

    In my experience, h264 - even with constant data rate and a fixed keyframe interval - is not necessarily decoded in perfect sync across multiple outputs.

    Also, you haven't said anything about the duration of your media. If your content is long, say 30 mins to an hour then, at the resolutions you're talking about, you might have to think about disk capacity if you use the Hap codec (512Gb SSDs can fill up fast). On the other hand, I've seen long-ish (17 minute duration, encoded by the client) h264 files require 2-3 minutes of preloading to get a clean start without stuttering.

    I generally encode video with either the Hap codec or as MPEG2 (you can find encoding tips on the forum). I haven't tried playing image sequences in a show yet. For very large resolutions like your video wall, it might simplify content preparation (no slicing required), but you would have to test carefully to make sure the data rate didn't exceed the capacity of the player machines.

    Hi matkeane,

    I'm try to convert to HAP , a below it's information after I'm try to convert to HAP,  I don't know I'm make something wrong for HAP setting because 1 min = 23gb

    and our plan for content it's 3 part and long 15min/part

    Kai

     

    Hap.jpg

    0

  4. any suggestion to use WO to play media content 13824x3465 pixel resolution

    in WATCHOUT FORUM

    Posted

    Dear All,

    I don't have any experience with media server system before until my company plan to make a new project, I’m start to research for media server last year I’m try a media server demo software from 3-4 brand then I’m decide and focus to Watchout and start to join a member to this forum on June 2018 then I’m order 2 license from Dataton Partner to test and learning until now, I’m learning Watchout from this forum, google, youtube, and I’m plan to training for operator's Course and Certified User soon,

    Many reason for my decide to use Watchout but this forum it’s one of my reason, I would like to thank all to support and I’m sorry for my English it’s not very well but I will try best to communication with everybody,

    In a below it’s my system design from my know how and learning in this forum, I’m got original sample media content from designer for 1 min with Prores, then I'm try to slice it to 8 file with H.264 constant frame rate, bit rate 80 Mb/s.

    My display for test it's Asus x299Pro ,i9 64Gb ram , 500Gb SSD for OS , Asus Hyper with 2 SSD in Raid 0, P2000 display,  I will order WX7100 and WX9100 to test in next week

    My project it's install in next 6 Month and plan to open in December 2019

    any comment or suggestion is appreciated.

     

    Best Regards,

    KAI

    WO design by KAI.jpg

    Content.jpg

    Original format.jpg

    Slice format.jpg

    0

  5. Feature Request ? Post here

    in WATCHOUT FORUM

    Posted

    On 10/6/2018 at 4:26 PM, Diego Marchente said:

    Good morning, there are often needs that I have not yet seen integrate and that I would often need. The list for practicality:

    • OSC In / Out protocol
    • Dante In / Out Protocol
    • MIDI Out Protocol
    • NDI Out Video and Audio Protocol
    • A coutdown for videos that can be added to the STATE window or separately and can be sized as desired
    • You can decide in the Tasks the size of the STOP and PLAY keys
    • Possibility to color BACKGROUND TASK TITLE in a separate and independent way
    • Possibility to color CONTROL CUE in a separate and independent way
    • Possibility to color BACKGROUND LAYERS in a separate and independent way
    • Integrate a real hot backup system (with a Master and Slave system) for the Producer
    • A multipoint Warping system similar to that of Panasonic or Epson but maintaining the curvature management that already exists
    • Create a multi-layer Warping system similar to the D3 Desguise
    • Have a window that allows you to see and possibly force the Display Computer EDID without having to log in Remote and do it on the Driver
    • You can import SketchUp * .skp files into the media without having to convert them
    • To enable a grid or a measurement tool in the STAGE that allows you to accurately calculate the mapping of the pixels used or displayed
    • To convert, if you wish, the VIDEO in HAP directly from the MEDIA window (Desguise has released the HAP Encoder for free)

    Thank you for your attention.

    Best regards

    +1 for this, it's all perfect but I hope next release it's have osc in/out in Watchout,

    Thank you so much 

    0

  6. any suggestion to use WO to play media content 13824x3465 pixel resolution

    in WATCHOUT FORUM

    Posted

    Hi All,

    I'm plan to use 2 server and 4 output / server and try to make slice to 2160x3465px (30fps) vertical output as RBeddig recommend,

    any recommend display card 4 output to support 2160x3456 30fps vertical output ,

    I have 2 choice for server,

    1st custom built with Windows 10 and other choice it's start with 2xWatchpax 4

    any suggestions would be appreciated

    Thank you so much

    Kai

     

     

    0

  7. any suggestion to use WO to play media content 13824x3465 pixel resolution

    in WATCHOUT FORUM

    Posted

    2 hours ago, RBeddig said:

    You will definitely have to pre-split the content to make it playable. How much you have to split depends on the codec, the frame rate of the video material and the performance of your WO servers.

    Splitting the content helps a lot to level out the load on each cpu core. For HAP the same can be achieved by using chunks, but you'll still have to reduce the number of pixels per stream.

    I would maybe go for two or three servers with 4 outputs each and use the outputs in portrait mode, i.e. each 4k output would play a file with 2160x3465px. Make sure to use a sync board to framelock/genlock the outputs. DO NOT render any transparent (empty) parts, e.g. do not render slices with 2160x3840 (because this is the UHD resolution) but render it to 2160x3465px as this is representing the real content size if using vertical outputs.

    Hi,

    any recommend for display card between nvidia quadro M6000 (6 output) and AMD W9000 (6 output)

    Thank you so much

     

    0

  8. any suggestion to use WO to play media content 13824x3465 pixel resolution

    in WATCHOUT FORUM

    Posted

    1 hour ago, jfk said:

    Doubt there is any single LED wall processor that can accept that resolution ;). So you will obviously break it up for the number of processors it will require. Once that is determined, motion content should be pre-split into Display server sized chunks. Stills can be left as big as you want/ need.

    Hi jfk,

    Sorry for my question it's not clear, I mean a playback system because it's large content, I'm sure for use 1 large file with native resolution or split it , output from WO go to video wall controller then go to 24xled screen sending ,

     

    Kai

    20181229_033727.jpg

    0

  12. Watchout Display Color problem

    in WATCHOUT FORUM

    Posted

    29 minutes ago, jfk said:

    Please share with the group what the problem was and how it was solved.

    HI,

    a main problem it's from "nvidia 3d stereoscopic" in nvidia control panel after disable , it's working fine with Watchout,

    before I find and fix a problem I will try to test other mapping software it's no problem then I try to clean and format windows and install WO 6.2.2 it's same problem with display, then try to search about nvidia display problem I see some forum taking about "nvidia 3d stereoscopic" I will try to check and after disable WO 6.2.2 it's working fine.

    my display card it's Quadro P2000 run on Win 10 LTSB,

    next week I will try to test with firepro wx4100.

    KAI

    20180712_205000.jpg

    0

  13. Watchout Display Color problem

    in WATCHOUT FORUM

    Posted

    7 hours ago, paolino said:

    Hi Kai,

    Try to check if the color space is the same on 2 output ( should be RGB and not YUV ).
    I'm seeing the image and probably you don't have the correct colorspace.
    Eventually think to use edid emulator to fix it

     

    Hi,

    Thank you so much for help, I find a problem and fix it, any way I'm new user for WO and I try to learning by my self first and then I'm plan to training WO Certified user in next 2-3 month.

     

    Kai,

    Phuket Thailand

    rsz_20180711_221057.jpg

    0

  14. Watchout Display Color problem

    in WATCHOUT FORUM

    Posted

    On 7/9/2018 at 7:17 AM, ken said:

    Hi Kai,

    I suggest you first try to change the signal cable, or swap the two monitors to see what happens.

    Best wishes

    Ken

    Hi Ken,

    I try to find a problem then it's from steroscopic 3d in nvidia control panel after disable it's working fine.

    Kai

    0

  15. Watchout Display Color problem

    in WATCHOUT FORUM

    Posted

    Dear All,

    I'm newbie with watchout and I will start to lerning before go to traning.

    I have a problem with color on display computer ir's not correct color, please see attathed files.

    1.How can I fix it to correct color?

    2.How to quit watchout display by production computer?

    My display hardware buit for learning watchout

    Z370n-wifi +i7 8700k, 16gb Ram, nvidia quadro P2000, 250Gb SSD 960 EVO (OS), 500Gb SSD 960 EVO (media)

    My production use HP-Z420 workstation 

    Windows 10 LTSB with Watchout 6.2.2, 

    Thank you so much

    Kai

    from Thailand

     

    20180708_185415.jpg

    20180708_185625.jpg

    20180708_185229.jpg

    0
×
×
  • Create New...