Jump to content
Dataton Forum

J Sikorski

Member
  • Content Count

    5
  • Joined

  • Last visited

About J Sikorski

  • Rank

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hi Angelica Sorry about that. It seems like we probably have the same issue regarding the production computer. We are using a probably underpowered machine for our production computer. It has an i3-3240 and 16gb RAM with Intel HD graphics running windows 10.
  2. Hello! i am experiencing this same issue with our current production. Running Watchout 6.2.2 through a ShowSage 4 output server. Are there any updates regarding this?
  3. I should also mention the string that I am trying to send. For Barco shutter close: $fe$00$23$42$00$65$ff I found this on another forum post about IP control for Barco projectors found here
  4. I just tried putting it in the main timeline. Issue still persists. I am also running watchout 6.2.2 on both my production and display computers
  5. Hello all, I am working as a projection tech for a production with my university's current production. I am trying to send strings to the projectors in order to command a power on/off or shutter close/open. So far I am not having luck, with every attempt getting the "Failed to deliver data" error. I am wondering what I am missing in my workflow or physical set up that may cause this. I am attaching my system diagram. I am using a generic Dell machine as the production computer and a ShowSage 4 output watchout cube as the display computer. The production computer runs through a long ethernet to an 8-port Netgear switch that then distributes the signal to the display computer and all four projectors. I have an output item in watchout that sends the info (ex. Name"BHL Lamp Off" TCP 192.168.000.100:43680 *the string being sent*) and then that output item is put in an auxiliary timeline to be triggered through the task menu. The projectors being used are two Barco PGWU-61b and two Christie DS+650. These each have an ethernet port in the back where I am trying to send the data to. So my question is, what am I missing where it would be causing this issue? Physical or software side. SignalMap-MediaV1.pdf
×
×
  • Create New...