-
Posts
3 -
Joined
-
Last visited
Posts posted by JeffreyRoss
-
-
I found the following message on the production computer:
From Display “Display 1” of stage tier “Base” of StageList of Stage, [Date/time] Network error; Display computer: No Response
Further testing shows that the 33.2 second issue only occurs if WatchOut is running on the production computer. Closing WatchOut on the production computer resolved the issue. I also replaced the crossover cable between the display computer and the production computer but no change. I'm wondering if I have a bad NIC.
0 -
I have a movie playing on 4 projectors (all same resolution). All was working fine for months but now I’m seeing the Watchout logo appear for about 1/2 second every 33.2 seconds of the movie. Rebooting didn’t help. Hoping someone can shed some light on this issue. Thanks.
0
Watchout logo appears every 33.2 seconds
in WATCHOUT FORUM
Posted
@ectoplasmosis,
The crossover cable runs between the production and display computers because IT would not allow us to connect the display computer to a switch unless it has anti-virus and per Dataton, AV can mess with Watchout. The production computer has two Nics and group policy prevents traffic from passing between them. A work-around that has been functioning well for years.