Luxav Daniel
-
Posts
30 -
Joined
-
Last visited
Posts posted by Luxav Daniel
-
-
Hi
I have setup a Win7 64Bit System on our Shuttle X-PC.
Everything is working fine, but the Network is slow...>(0.25% shown by the Taskmanager on de Production Notebook)
My Solution: Disabling the FlowControl on the Yukon Network Device. Now it is a bit faster than the WinXP Shuttle X-PC. Tommorrow i will check a another Switch
Now its over 25%.
Greetings from Germany
Daniel
0 -
Hi
You can see it in the TASK Window. In my Case its ok to see it there.
Daniel
0 -
Hi
We have different small 5 to 8 port switches here and with one type of switsch we have also problems! The big 24Port is fine :-)
Greetings from Germany
Daniel
0 -
HI
I can help you! I hope its not to late!
I have some Commands for the Vista Systems spyder 344.
I can check if these Commands also can control the newer X20 which we also have.
Also i can control the Barco Image Pro HD with Watchout, so i get an extra "Layer" ;-)
Her are the Basics for Watchout 4
You must set a Output String to Spyder (Window Output):
Output Port Name "Spyder" (you can use your own name for that)
Network Port
Network Adress (our Spyder is 172.16.17.252)
IP Port Number "11116"
UDP Protokol
Here is a String CUE for FunktionKey 1 that you can drop into a timeline (i use AUX Timelines which i can start via Midi inputs):
spyder$00$00$00$00FKR 1
BTR (Background Transition)
spyder$00$00$00$00BTR 60
This Command must work, if not the IP or something else ist Wrong
Freeze Layer 1
spyder$00$00$00$00FRZ 1 2
Unfreeze Layer 1
spyder$00$00$00$00FRZ 0 2
Spyder Cue 1 (Command Key Recall)
spyder$00$00$00$00RSC 0 3 R
Notice that the first Command key is the Number 0 (ID) ! Then Script Cue 3
It could be possible that the numbers are the same as the icon Command and Function Keys (minus 1) or in the order you create it! i am not sure in that Moment! Try it ;-)
Router Salvo (here for our Extron RGBHV Xcross)
spyder$00$00$00$00RCR 2 P
0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7
The first part is almost the same. the little commands are from the manual (Hardware Op Manual Page 15)
You can use Watchout without Dongle on the same Computer as Vista advanced to get Midi Inputs direct to the Spyder.
I hope i can help you
Greetings from Germany
Daniel
0
Help needed on controlling a Barco Switcher Controller through Watchout
in WATCHOUT FORUM
Posted
Hi
Problem solved?
I control a Image Pro to save Vista System Layers (small 344 with 4 Layers)
My solution there:
String Output: TCP with right IP and Port
Task:
Data to send:
RTE IN 4 (will shwo captured Logo)
Clear and Easy withe the Manual! Controlling the Spyder is more work ;-)
Greetinx from Munich
Daniel