-
Posts
39 -
Joined
-
Last visited
Posts posted by Hugo Janzen
-
-
Hi there,
System W7, WO531, Moxa RS 232 board in Display PC.
Using an Auxilary Timeline and when executing a RS232 command on time 0:00.00 the command will never be transmitted, running this timeline.
It's neccessary to have the cue placed > 0.00 to be able to run over it. Than the cue is properly executed and commands are sent out.
Hugo
0 -
WO can lock to your ProTools. Both a Production Pc or a Display Pc (Read the manual)
Or ProTools can lock to WO, use a LTC audio track on your Main TimeLine.
Or use a showcontrol system controlling both, using ethernet (TCP/IP).
Good luck !
0 -
Hi all,
Reading the posted topics last weeks my opinion is that a large amount of topics should be addressed to Dataton Sales, Support or Marketing instead of posting them to us: professional colleagues.
So my suggestion is to post only the specific experienced related subjects on the forum.
I'm looking forward to your responses
Hugo J
0 -
Check page 42,> of the Watchout manual.
It is explained very clear and the method works flawless.
0 -
Great job !
Cheers !
0 -
From a hardware point of view:
A network switch with a build in power supply makes your installation more solid.
0 -
Yes you can.
Create your mask as an image (Photoshop) and create the area to be masked in black and the area around as transparent surface.
Little trick: use a photo camera and make a picture from the exact location as you projectorlens is and make your screen white.
The picture will have -in the correct perspective- the outline of the mask you need.
Watchout is very powerful when it comes ro scaling and warping, so you can adjust your projection also afterwards.
Hugo
0 -
Hi Roberto,
This might work, but I would recommend using a Medialon ShowMaster in between, so you can really control your show and be able to control only specific parts of the show on specific moments.
Otherwise a presenter using the Perfect Cue has control over your WO system on any moment, which can led to unwanted situations.
Hugo
0 -
Proven chipset of motherboard is essential.
Contact Datapath.
Hugo
0 -
Hi there,
Had the same problem with ans Asus mainboard P7H55-USB3.
Now using P8P67 LE. Datapath works fine.
Some WO-system builders have good experience using the mainboard Asus P8P67 WS Revolution.
There can be a problem that the PCIe bus is switched to a lower speed. And that's the reason why the Datapath card will not be detected by the Vision software/driver.
Contact support@datapath.co.uk
They can send you diagnostic software to run, so they can examine your systems remotely by the tables you send them using this diagnostic programs.
Good luck,
Hugo
0
Please, SMPTE TIMECODE nonDropNTSC 2hour wav file!
in WATCHOUT FORUM
Posted
Make LTC SMPTE Timecode Wav file
Handy!
HUGO