Eddy Yanto Posted January 9, 2015 Report Share Posted January 9, 2015 Hi, I am looking to build a system with the following requirements: The system will have 2 outputs to 4K projectors — I don't have much detail on this yet except that the projector will be able to accept the 4K signal on a single DP 1.2 port. The system will also take in 4 HD-SDI inputs. In the past, I had built and configured a few systems based on the spec and tweaking list released by Dataton (both May 2012 and Mar 2013 Edition) and have not seen any newer update on the spec yet. Does the same spec still applicable to use? Would you be able to share or recommend the hardware that fit the requirements above? Thank you! -- Eddy 0 Quote Link to comment Share on other sites More sharing options...
Andrew Posted January 12, 2015 Report Share Posted January 12, 2015 i was test a few hardwere. our system was i7 4930k, asus x79, w7000, 32G, win7 64bit. Video : h.264, UHD, 60Mbps, CBR 2 output was so good. 0 Quote Link to comment Share on other sites More sharing options...
Eddy Yanto Posted January 12, 2015 Author Report Share Posted January 12, 2015 Hi Andrew, Thank you for sharing your dual UHD setup! I will look into using the same setup. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.