topherbb Posted June 27, 2017 Report Share Posted June 27, 2017 It would make my life a whole lot easier if I could send multiple “displays” in Watchout to the same projector. The set for the play that I'm working on has 3 different levels, and I would like to be able to manipulate the display settings individually for each one. I know that this is possible in Qlab, so it seems weird that I wouldn’t be able to do it in Watchout. 0 Quote Link to comment Share on other sites More sharing options...
Claude.Rivet Posted June 28, 2017 Report Share Posted June 28, 2017 Use virtual displays, you lose the warping, which is a shame, I'd really like to warp the show as a whole rather than by screen but otherwise it would do the trick. Other than that you basically seem to be referring to what Watchout calls task, which are timelines you can start and stop independently of one another, each task can be layered according to the rule it is set to (always above, according to list order...). 0 Quote Link to comment Share on other sites More sharing options...
Walter Soyka Posted June 29, 2017 Report Share Posted June 29, 2017 Perhaps your project would be a good candidate for a projection-mapping workflow: https://www.dataton.com/3d-projection-mapping-basics w. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.