Fredrik Posted March 12, 2018 Report Share Posted March 12, 2018 So, I was wondering if anyone has experience with 50hz on 4 outputs from one card, in my case I use a w7100 firepro. And I can only get it to output 50hz on 2 displays, when I plug in a 3rd one, they all go back to 60 whatever I do. Thanks in advance. 0 Quote Link to comment Share on other sites More sharing options...
zackboyd Posted March 12, 2018 Report Share Posted March 12, 2018 Capture your EDID on all four outputs, set them up in firepro settings to 50hz, make sure you're using active adaptors, and make sure the project settings in watchout are set to 50hz. Z 0 Quote Link to comment Share on other sites More sharing options...
Fredrik Posted March 12, 2018 Author Report Share Posted March 12, 2018 Put 4 active adapters on order, will prolly be here tomorrow, will check back with results after I try it. Thanks Zack 0 Quote Link to comment Share on other sites More sharing options...
Dataton Partner Walter Posted March 12, 2018 Dataton Partner Report Share Posted March 12, 2018 What he said ;-) it’s all about edid management. 0 Quote Link to comment Share on other sites More sharing options...
Fredrik Posted March 19, 2018 Author Report Share Posted March 19, 2018 So this fixed my problem flawlessly, didnt even start to think about adaptors when buying the machines, just set them up with what the GPU´s came with, turn out those are dual link dvi, passive. Thank you again Zack. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.