bjoerka Posted May 18, 2018 Report Share Posted May 18, 2018 for several days we had our system running without any problems. 1 production computer and 2 display computer with each 4 outputs today, when i tried to go online, i got several error messages. (see below) when i check the connection for each display in the tier base, they are all ok and green... any hints about the error messages? From Display "Display 5" of Stage Tier "Base" of StageList of Stage, 2018-05-18 10:01:40 Setting error: 3; Command: authenticate; Authentication failed; 10.1.249.200 From Display "Display 1" of Stage Tier "Base" of StageList of Stage, 2018-05-18 10:01:40 Setting error: 3; Command: authenticate; Authentication failed; 10.1.249.200 From Display "Display 5" of Stage Tier "Base" of StageList of Stage, 2018-05-18 10:01:40 Setting error: 1; Not authorized for: fileServer3 From Display "Display 5" of Stage Tier "Base" of StageList of Stage, 2018-05-18 10:01:40 Runtime error; Unrecognized command: 78 From Display "Display 5" of Stage Tier "Base" of StageList of Stage, 2018-05-18 10:01:40 Runtime error; Unrecognized command: 11 From Display "Display 1" of Stage Tier "Base" of StageList of Stage, 2018-05-18 10:01:40 Setting error: 1; Not authorized for: fileServer3 From Display "Display 1" of Stage Tier "Base" of StageList of Stage, 2018-05-18 10:01:40 Runtime error; Unrecognized command: 78 From Display "Display 1" of Stage Tier "Base" of StageList of Stage, 2018-05-18 10:01:40 Runtime error; Unrecognized command: 11 From Display "Display 1" of Stage Tier "Base" of StageList of Stage, 2018-05-18 10:01:40 Network error; Display computer: Connection Lost From Display "Display 5" of Stage Tier "Base" of StageList of Stage, 2018-05-18 10:01:40 Network error; Display computer: Connection Lost 0 Quote Link to comment Share on other sites More sharing options...
Dataton Partner RBeddig Posted May 18, 2018 Dataton Partner Report Share Posted May 18, 2018 Problem has been solved and was caused by an external show control software. //Rainer 0 Quote Link to comment Share on other sites More sharing options...
LeoHa Posted February 2, 2019 Report Share Posted February 2, 2019 On Fri May 18 2018 at 10:04 PM, RBeddig said: Problem has been solved and was caused by an external show control software. //Rainer same problem either and no external show control software， only controlled by the production software the message box always tell : network error；display computer: connection lost and connect Failed but the display computer can be controlled by the production correctly anybody could explain this? thanks 0 Quote Link to comment Share on other sites More sharing options...
Dataton Partner RBeddig Posted February 3, 2019 Dataton Partner Report Share Posted February 3, 2019 This is a different problem and should probably moved to a new separate thread. There are many reasons why you could see a network error and the loss of the connection. Pls. elaborate a bit what you are doing and how the error messages look like more specifically. Which version of WATCHOUT are you using? What Windows version? Are you using WATCHMAX or WATCHPAX or your own builds? How does your network look like and are there other devices inside the network? Reasons could be hardware related, software related (not only WATCHOUT!), tweaking, codecs.... 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.