Jump to content

Crestron transmitters and display port problems

Ben ross

Recommended Posts

Having trouble getting watchpax to output to xvga (1024×768) projectors. We're using crestron transmitters that are HDbaseT into projectors. They are good to 4k.

I seems like the display port to HDMI adapter might be the problem. We tried passive and active and 1.2 and 1.4 and can't get them to work.

Theres one old adapter that works that we borrowed. Need 5!  No markings on it. Not sure how to trouble shoot this one.

Thanks for reading.

Link to comment
Share on other sites

  • Dataton Partner

Could be an EDID issue. Have you tried using a physical EDID minder behind the graphic card output?

XVGA is not that common anymore today and the graphic card usually tries the highest and fastest EDID it can see.

Ideally you'd use an EDID minder which you can set to only one frequency through dip-switches or software.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...