Jump to content

Multidisplay Question


dwvabeach
 Share

Recommended Posts

Hello, I am configuring a setup that is using multidisplay outputs on Windows 7 and running Watchout 5.1.

 

Is it possible to use the three ports of the AMD Radeon 6570 to display Watchout on three projectors at the same time? The projectors only have DVI inputs on them so I would be using the display port adapters and a straight DVI cable to connect to the projectors.

 

I tried it with the Display port adapters and cables that I have and when I connect everything, one of the projectors goes dark every time I connect a third cable to the card. Is it that the card doesn't support three connections at once, or do they have to be Active as suggested in another post?

 

I read in another post something about having to use Active Display port converters if you are using a Legacy port type. Would this be a case where I would need to purchase Active Display Port to DVI converters as opposed to the general ones that came with the card?

 

Any help would be appreciated.

 

Thank you,

 

David W.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...