NNinja
-
Posts
92 -
Joined
-
Last visited
Posts posted by NNinja
-
-
I can answer you on aux timelines - we have done several live events with about 100 timelines - we usually use them as cues for specific moments in the scenario (new stage, new speaker, diff videos, etc)
Depending on the reaction of the video character - maybe you can also use tween tracks like position instead of only aux timelines
0 -
Hi Nninja,
yes,i would be pleased to hear the results of your tests.
Mathieu
Hi!
Unfortunately I couldn't get it work. With the new DVS with WDM support I can achieve 8in/8out in Windows, but DVS is shown as 4 single sound cards so I cannot make it work as a multichannel card in WO.
Maybe in WO ver6 there will be ASIO support
0 -
I also have good experience with CYP
For Fiber we are using Opticis DVFX100, for LAN - CYP, SY & SC&T
0 -
Hi!
Just as a comment - would it be interesting for the rest of the users if I test our system with Dante Virtual Sound Card ?
I have a license and a equipment I can test with, I think we can use more than 8 channels in WO because right now I have 16 channels for another software
Best regards,
0 -
Hi!
I think the best card is the one that best suites both the task and the budget
We are using ATI HD79xx with 4 Display ports, 1 DVI and 1 DualLink DVI. With the proper hardware configuration (proposed in another topic) we can feed up to 5 displays from 1 PC
0 -
Unfortunately:
"RGB Pro and Vision RGB E2s cards are not currently supported when installed together in one system.
You may run either a RGBPro system or a Vision card system but cannot mix the two together.
We apologise for the inconvenience"
Well... I have to buy a motherboard that has 2 PCIe x4 slots so I can use 2 E2S cards together.
0 -
HI!
I'm using latest drivers from their website, different ones for the two cards(versions you've mentioned).
Both options (user & kernel) mode are working in the same way
I'll contact Datapath and I'll post their answer
0 -
Hi!
Is it possible to have both cards in one display PC?
Today I have installed both of them in one of my computers. Configuration is as follows:
ASUS P8Z68 Deluxe
ATi HD6990 with 4 displays (one DVI-RGB, 1 HDMI, 2x miniDP-RGB)
1 x composite capture on PCI slot
1 x Datapath Vision E2S on PCI Express
1 x Datapath Vision RGBPRO2 on PCI slot
All cards are installed with no problems in Windows 7, 2 devices for E2S and 4 devices for RGBPRO2
In Watchout (ver 5.3) all devices can be chosen in Video in. But when I add them as live video - camera input is OK, E2S and RGB Pro are showing one and the same - the input that is fed to the DVI port via DVI-RGB adapter.
Any ideas ?
0 -
I agree, it's neither expensive, nor complicated. Both options (with MIDI Footswitch and MIDI-USV and the second one, with ARDUINO) are below 250USD.
Maybe you can check this site, http://www.videopete.com/midi/ - there are lots of different options
Good luck!
0 -
More or less - yes. We have done a project with ARDUINO controller with MIDI output board that sent MIDI command to the Watchout Cluster. There are many other options available including via iPhone/ iPad or other similar device
0 -
Hi! Instagram images via Dynamic server is one of the topics covered in the Watchout Academy. I think Jonas or Fredrik can give you more details on it.
Good luck!
0 -
Connect the WO Cluster in a network with a WiFi router and connect the touchOSC device to the network (the AP of the router should NOT be in isolated mode).
0 -
Hi!
From a few days I'm playing with an app, called TouchOSC (for iPad/iPhone), I think it's similar to "MidiTouch"
0 -
Hi!
Have you checked in the processes window if there is a running WO process ?
0 -
Hi all!
I have a strange problem with our brand new WO computers (Asus P8Z68 Deluxe with ATI HD6950 running under WinXP Pro).
While the Virtu technology was ON the WO Display soft was starting and after approx 20-30sec was going out of full screen mode (no error displayed on the production PC)
After disabling the VIRTU the problem is a little bit different - the WO starts automaticly out of full screen mode and after restarting it everything is OK.
In both cases the second output of the videocard is not enabled so it shouldn't presume it's in extended mode
Any ideas would be appreciated
Niki
0 -
Tnx for the info, Fredrik!
What auto-callibration system would you recommend?
BR,
Nikolay Kachamakov
www.seg.bg
0
Playing random photos via Dynamic Image server
in WATCHOUT FORUM
Posted
Hi!
Does anyone has any ideas how to play random pics via the Dinamic image server option?
The idea is that some participants of an event make selfies and upload them somewhere (via email, ftp or whatever) and then we must play them randomly