Albertoduo Posted December 6, 2016 Report Share Posted December 6, 2016 Working with DMX protocol sometimes should be useful to send to the output an exact dmx value between 0 to 255, (for example dmx 3 value 101), the watchout range 0 to 1 is difficult to control, there is a way to change it in the slider? 0 Quote Link to comment Share on other sites More sharing options...
Moderator jfk Posted December 6, 2016 Moderator Report Share Posted December 6, 2016 Working with DMX protocol sometimes should be useful to send to the output an exact dmx value between 0 to 255, (for example dmx 3 value 101), the watchout range 0 to 1 is difficult to control, there is a way to change it in the slider? No. But you can enter a numeric value in the level. You have to do the math for a specific level, 101/256 = 0.39453125, although 0.395 should be more than close enough. 0 Quote Link to comment Share on other sites More sharing options...
Albertoduo Posted December 7, 2016 Author Report Share Posted December 7, 2016 Yes, I know, should be useful to use the other range just in the output mode, aligned with the DMX standard, may be in a future release. thanks 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.