WatchPax 4 Audio out problem

[Ade]

Hi, thanks very much for your help.

I have two questions.

1. I use WatchPax 4 in my office. I know watchPax 4 has one 3.5 mm stereo audio out. I used this port to connect my Speaker, then I choose all audio device, and play timeline. My Speaker also hadn't audio out. Is there any way to solve the problem?

2.If I want timecode in WatchPax4 to run the timeline, How can I do? Add audio interface?

[jfk]

It appears you are selecting Realtek Digital out. WATCHPAX have no built-in digital audio out.

The 3.5mm jack is analog audio out, so the correct selection would be Speakers. (Would be more convenient if they just called it analog.)

Timecode in requires a compatible USB audio interface (and you can only have one audio interface, so if you want to output audio and read timecode, a single interface must provide both).

Current versions of WATCHOUT support ASIO for the audio input - i.e. ASIO for both output and input. (much older ASIO versions of 6 used a mix of ASIO output, but DirectX for input.)

[Ade]

Thank you very much.

I tried to select Speakers(Realtek High Definition Audio) before, my speaker also hadn't audio out. 

Which audio interface do you suggest? I tried to use scarlett audio interface 2i2 3rd gen, but WATCHPAX 4 no working.

[jfk]

54 minutes ago, Ade said:

Thank you very much.

I tried to select Speakers(Realtek High Definition Audio) before, my speaker also hadn't audio out. 

Which audio interface do you suggest? I tried to use scarlett audio interface 2i2 3rd gen, but WATCHPAX 4 no working.

The speaker selection should work for the 3.5mm output. Might check the connections and impedance match.

What build is your WATCHPAX 4?

The Focusrite 3rd gen driver is in the latest WATCHPAX 4 build (r38) only, you may need to update the build.