mayunta

Hello, I have problems with an audio interface Behringer FCA610 and my new pc display. I have used this interface for several years with my other PC displays based on X79 chipset and I have had no problems. Now I have assembled several Displays Watchout based on X99 chipset and all have the same problem. It is as follows: When I play in watchout, simultaneously, a sound (WAV file) and a video (in MPEG-2 or H.264) the interface fails and stops intermittently heard. If only one sound (WAV file) is played, this does not happen. Works correctly If a sound (WAV file) and any other video (HAP, ANIMATION, etc ..) is reproduced simultaneously, this does not happen. Works correctly I appreciate any help a greeting.

Hi jfk, I have seen more clearly the problem. When you click Refresh media files, it takes a lot to do (more than two minutes), if you expect that time everything works fine, but if you update the display before, the problem happens. At this link you can download a test. (refresh "test01 - copy A" with "test01 - copy B" changing the name to "test01") http://bit.ly/1S4Fj0z A greeting.

Hello, I'm working with version 6.1 and I have seen a possible error. When some media files are refreshed and then display is updated, the Watchout producer fails. Not always happen. With the same hardware in version 6.02 this does not happen. Best regards

Hi, In Watchout 6 there is an error with import MPEG2. If Video file is 1080p (1920 x 1080) but in Watchout 6 is 1920 x 1088. That same file in Watchout 5.5.2 is correct 1920 x 1080. Any idea?

Hello, I need help with a problem I have at the DMX output watchout. When one of the channels is fading out to zero, on another channel there are small variations in level. I tried with change channels and is still happening. The equipment used is: Watchout 5.5.2 DMX Interface Enttec ODE (firmware 2.3) I have reproduced the error because my client also happens in your installation. I have a video with error and photo settings. I can mail the test file and video. Thank you.

We have already bought the next model: http://www.amazon.com/StarTech-com-MDP2DVID-DisplayPort-Dual-Link-Powered/dp/B004I6L6DW thanks.

ok, thanks.

Which mDP adapter is recommended to work with watchpax at a resolution of 2560 x 1080 pixels?. This is the native resolution of the Projector Barco CRPN-52B.

I've been looking at the characteristics of the audio interface "TC electronic Konnect 48". Does anyone has tried to use 8 channels? According to the manual the WDM driver can be set to surround mode. This is the link: http://www.tcelectronic.com/media/218482/tc_electronic_studio_konnekt_48_manual_english.pdf

No, for the moment, we tested several notebooks to see if it works. But in all those windows 8.1 does not work Still we have not tested on dedicated computers that have installed windows 7 64 bits Someone has checked Displays with windows 8.1 installed?

Hi, We are currently using multiple computers with windows 7 64 bit and everything is perfect. We are testing equipment for use as windows 8.1 Displays watchout, but all have the same problem. In the test we have only loaded a text, but so does any content. In the control computer we get the following message. "Operating system error: -2147467259; unspecified error; Too complex effects" any suggestions? Thanks